This question is not about painting, it's about math. It is a proportion problem: 2 is to 20 as "X" is to 10. Cross multiplication yields the equation 2*10 = X*20, which gives the answer X = 1.
For what it's worth, Eduardo is ending up with a pretty small painting...
the red poppy painting was really big. infact it was almost the height of the statue of liberty. thats a big painting-
Muptily the height x width then subtract any window or door opening using the same height x width method. This should give you a close per gallon needed based on the coverage of the paint.
The differences between 2-dimensional and 3-dimensional artwork are the differences between a painting and a sculpture. A painting, a drawing, a photograph, are all 2-dimensional, existing on a flat canvas or piece of paper, or on a wall, etc. A sculpture, a mobile, etc., are 3-dimensional objects that may be hung from or stand on a surface, but have length, width and height.
Not enough info. It depends on the size of the panel and the coverage of the paint.
Length by height.Addition:About artworks it is always height by length.
It is generally height by width.
the red poppy painting was really big. infact it was almost the height of the statue of liberty. thats a big painting-
you should measure your weight,height and your stomach.If its reduced that means you have reduced your weight
The volume is reduced to 1/3 of its size.
height of reference point to determine level
Reduced level in land surveying refers to the vertical distance from a known elevation point, such as a benchmark, to a point of interest on the ground. It is typically used to determine the height or depth of a specific location relative to a reference point.
lihfohgoif vhohf hih tlkhi urg
No, cuz they kept their legs somewhere else.
c.The height of the man and woman as compared to all the other people.
Depending on where the painting is hanging will provide the best light source. IF the painting hands in an area where people will have opportunity to touch the lamp then it should be above head height - however, if its light to effect with no people likely to have access to the lamp then it can best present from the lower edge of the painting.
Lower the vehicle ride height or install air dam and/or ground effect bodywork.
A reduced level is the vertical distance between a survey point and the adopted level datum. There are two methods for calculating reduced levels, namely the "rise and fall" method and the "height of collimation" method. The latter reduces levels relative to the instrument height. As it has inferior built-in checks, it is unreliable.