Touch up is the best solution!
If the white paint is well-bonded to the surface, and the red is very fresh, a lot of times you can use a sharp razor blade to peel the red paint off the white. If the red is stuck on there, I would use a sanding block to remove as much red paint as I could without damaging much of the white paint, then put a coat of white paint over the area. Next time, get a newspaper and tape it to the white walls to protect the building.
you will i die , i know this because am dead .
Mud stains can be removed from dry cloth. With the wet cloth wipe it fully. And using soap solution with water remove the mud from auto paint.
Spirit based is oil based and oil and water don't mix. Use paint thinner or mineral spirits.
Blood, like other protein stains, will bleed through paint. The newer the blood stain the more it will bleed through. Your best bet would be to apply a coat of primer/sealer before applying paint.
White spirit can effectively remove oil-based stains, grease stains, paint stains, and tar stains from surfaces. It is commonly used as a solvent to dissolve and clean these types of stains.
If you are referring to paint stains, get them off with the thinner of the paint you've been using, then wash in warm soapy water and use a hand lotion after.
Using the incorrect cleaner will stain and ruin the clear coat on the rims.
Try a Mr. Clean Magic Eraser...these work for me on everything! We removed permanent marker from a white latex painted wall! :O)
how can you remove walnut stains from your car paint with out hurting your paint on your car
You will need to paint the stain with a pickling gel. It is very rough, but it will get the stain off.
Use hairspray on it :) Sounds crazy but really works! ;D
You will need to use a sealant, such as Killz, to keep the stains from bleeding through the new paint.
White spirit takes off some enamels and alkyds.
White Stains was created in 1898.
To effectively remove paint stains from wood surfaces, you can use a combination of sanding, scraping, and using a paint stripper or solvent. Sand the stained area gently to remove the paint, then scrape off any remaining residue. You can also apply a paint stripper or solvent according to the manufacturer's instructions to help lift the paint off the wood. Be sure to wear protective gear and work in a well-ventilated area when using these chemicals.
white paint