connect it with a crossover cable connect both end to same type port either two gigabit port or two fast ehternet port
a modem that connects to your PC either directly or through a router/switch/hub, windows. The modem must be connected to the internet, either through Coax', phone-line or other.
Follow the + battery cable from battery should connect to starter solenoid (relay)
The switch will not increase the current. The only thing that will increase the current is adding a larger load.Another AnswerTo maximize current flow in a circuit with 2 Flashlightbatteries, 2 Flashlight bulbs, and a switch, set aside the bulbs, put the batteries in series, connect the switch between the end poles of the battery set, and close the switch. The batteries will get hot and probably leak electrolyte, and be drained in seconds.If you want to maximize current through the circuit withthe bulbs in it, connect the bulbs in parallel to each other, and in series with the switch.
Maybe on the top of the starter - follow the + battery cable it will connect to the starter relay (solenoid)
give me one property of metal that makes it a good material to connect the cell and bulb
we use straight cable to connect between the router and switch as router and switch are different devices.
switch the printer on before the router
There are three types of cables used in paired connection of computers: crossover, straight-through, and rollover. Crossover cables are used to connect two devices directly, without a router or switch in between. Straight-through cables are typically used to connect a computer to a router or switch, while rollover cables are typically used to connect a modem to a router or switch.
What is diffrent between router and switch?
There are at least two ways. First, you connect the wireless router directly to the cable modem, and then the switch in the wireless router. You have to connect the cable coming from the modem in the wireless router internet port. Second, you connect the wireless router to the switch, again the cable coming from the switch you have to connect on the wireless router internet port. It's better to put the wireless router just after the modem, but it's not required.
A switch cannot function as a router. But you can plug a switch in to one of the ports on the router if you need additional ports.
Turn off dhcp in router settings.
Yes, it's possible. Connect the wire coming from the switch in the internet port in the router.
Connect a router to the DSL modem, and if necessary add a switch to the router. Then connect all of your systems to the switch and the router.
Yes. Just connect one switch strait into the router. Then hook the other three switches into the first switch. -DJ Craig
Provided the manufacturers are compatible you can connect your network swithc to your router.
packaging tape