Remove the coil packs (follow spark plugs to the coil pack) then remove the control module (sits under the coil packs)
the ignition control module is operated by the pcm,the pcm tells the ignition control module when to energize the coils to enable spark
The 1994 Ford Aerostar ignition control module is located on the firewall in the engine compartment. The ignition control module will be on the drivers side of the firewall.
Under ignition coils
From 1991 to 1995 with the EEC-IV system there is an external ignition control module mounted on the radiator support in front of the battery. Remove the battery in order to change the module. 1996 and newer with the EEC-V system, the ignition control module is incorperated into the powertrain control module (PCM) that is visible from the engine compartment, in the firewall, on the passenger side.
Only the EEC-IV ignition systems ( 1991 to 1995) use an external ICM (ignition control module) . From 1996 on with the EEC-V system the ignition control module is incorperated into the power control module (PCM) mounted in your firewall on the passenger side.
How do you change the ignition control module in a 1988 Chevy Silverado 5.7L
Remove the wiring harness from your 1995 Chevy Blazer ignition control module. Remove the ignition control module retaining screws. Reverse the process to install your new ignition control module.
there is no ignition control module on the 1996 model its all through the PCM
Disconnect the battery. Remove the ignition coils. Remove the ignition control module that was under the coils, and replace it.
the ignition control module is operated by the pcm,the pcm tells the ignition control module when to energize the coils to enable spark
Which engine does your car have?
The 1994 Ford Aerostar ignition control module is located on the firewall in the engine compartment. The ignition control module will be on the drivers side of the firewall.
Under ignition coils
You can find the Ford Focus ignition control module beneath the drivers side dashboard. The ignition control module will be above the accelerator pedal.
In the front of the motor by the transmission dipstick. This is where your spark plugs from the engine go.
no it has a distributorless ignition system. it cosists off two coil packs and the ignition control module that sits under them
Where is the ignition control module located in my 1992 Crown Victoria