answersLogoWhite

0

Yes, mix in a couple teaspoons regular talcum powder.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Art & Architecture

Do you have to paint over kilz?

Yes, you typically need to paint over Kilz after applying it. Kilz is a primer designed to seal stains, odors, and provide a uniform surface for paint, but it is not intended as a final coat. Once it dries, you should apply a topcoat of paint to achieve the desired finish and protect the surface.


What is the difference between Lustre Paint and Emulsion Paint?

Emulsion is a type of paint, some call it latex, and it is water based. Emulsion paint comes in several gloss factors (levels).Gloss paint refers to the hardness of the finish and the amount of light reflected from it.The most common gloss factors (from least to most) are:Matte - used for ceilings and areas that do not get touched, or in some cases for the depth of color. This paint can not be washed or cleaned without ruining the finish.Eggshell - used commonly in bedrooms, living rooms and areas where there is a minimum of hand traffic. The color depth and finish are esthetically pleasing and you can wipe fingerprints and mild dirt off without marring the finish.Pearl - this is a relatively new finish that can be used in kitchens, bathrooms and high traffic hallways. Many of my clients use this in children's play rooms. Because the finish is harder you can actually wash these walls to remove dirt.Semi-gloss - This is the traditional finish for trim, and was once used in kitchens and baths because the harder finish was less permeable to water. The hardness factor allows the paint to stand up better to wear and tear and can be washed repeatedly, making it ideal for baseboards, casings, other trim work.Gloss - With the range of gloss factors available today, full gloss paint is most commonly used for furniture these days. The hardness factor makes a nice smooth, durable finish.


What paint has more binder in it than tempera paint?

Acrylic paint contains more binder than tempera paint. The higher binder content in acrylics allows for a more flexible and durable finish once dry. This characteristic makes acrylics suitable for a variety of surfaces and techniques, unlike tempera, which is typically more opaque and less water-resistant.


How do you paint styrophome?

To paint Styrofoam, start by cleaning the surface to remove any dust or debris. Use a spray primer specifically designed for foam to create a smooth base and prevent the paint from melting the material. Once the primer is dry, apply acrylic or latex paint with a brush or spray can for even coverage. Allow the paint to dry completely between coats to achieve the desired finish.


Can you mix flat interior paint with eggshell interior paint?

I have two gallon of paint. Same brand name. one is egg shell the other is flat. can I mix the to together? ANSWER: As long as they are the same base, water or oil, you can mix them together. Realize though, that you will never be able to get touch up for the paint once it runs out unless you mix to a ratio that can be recreated.

Related Questions

Can you paint over spackle?

Yes, you can paint over spackle once it has dried completely. Make sure to sand the spackled area smooth before applying paint for a seamless finish.


How can I achieve a distressed gold paint finish on my furniture?

To achieve a distressed gold paint finish on your furniture, start by applying a base coat of gold paint. Once dry, lightly sand the edges and corners to create a worn look. Next, apply a darker paint or stain in areas where natural wear would occur. Finally, seal the finish with a clear topcoat to protect the paint and give it a polished look.


How do you make a flat paint into satin?

No, there is not a product In America that can do that. I work for Sherwin-Williams and know this for a fact. If you add more of the High Gloss version of the same exact color you can move the gloss from flat to satin.


How do you finish level tweny-six on factory balls 2?

To finish level 26, do the following in corresponding order: Firstly, torch it once (blowtorch icon), then water it twice (watering can icon), then use the red paint once (red pippette icon), then use the fish once (fish icon), then finally use the yellow paint (yellow pippette icon) and you'll be finished.


Is calcium shiny or dull etc?

Calcium itself is a dull, silvery-white metal that can develop a shiny appearance when freshly cut. However, once exposed to air, it quickly forms a dull oxide layer that gives it a more matte finish.


How can I enhance the appearance of my kitchen with concrete countertop paint?

To enhance the appearance of your kitchen with concrete countertop paint, you can start by thoroughly cleaning and sanding the surface of the countertop. Next, apply a primer specifically designed for concrete surfaces. Once the primer is dry, you can paint the countertop with a high-quality concrete paint in the color of your choice. Finish off the project by applying a sealant to protect the paint and give the countertop a glossy finish.


How can I achieve an antique paint finish on furniture?

To achieve an antique paint finish on furniture, start by sanding the piece to create a smooth surface. Apply a base coat of paint in a color of your choice, then add a layer of crackle medium for a weathered look. Once dry, lightly sand the piece to reveal the base coat underneath. Finally, apply a coat of antiquing glaze to add depth and age to the finish.


Do you have to paint over kilz?

Yes, you typically need to paint over Kilz after applying it. Kilz is a primer designed to seal stains, odors, and provide a uniform surface for paint, but it is not intended as a final coat. Once it dries, you should apply a topcoat of paint to achieve the desired finish and protect the surface.


How can I effectively paint over linseed oil to ensure proper adhesion and a smooth finish?

To effectively paint over linseed oil for proper adhesion and a smooth finish, you should first sand the surface to create a rough texture for the paint to grip onto. Then, apply a primer specifically designed for use over oil-based surfaces. Once the primer is dry, you can paint over it with your desired paint, making sure to apply thin, even coats and allowing each coat to dry completely before applying the next. This process will help ensure that the paint adheres well to the linseed oil surface and provides a smooth finish.


How can I paint a piano black?

To paint a piano black, you will need to first prepare the surface by sanding it lightly and cleaning it thoroughly. Next, apply a primer specifically designed for painting on glossy surfaces like pianos. Once the primer is dry, you can apply several coats of black paint, allowing each coat to dry completely before applying the next. Finish with a clear coat to protect the paint and give it a glossy finish.


How to patch paint on a wall effectively?

To patch paint on a wall effectively, start by cleaning the area, sanding down any rough spots, and applying a primer. Once the primer is dry, apply the paint in thin layers, allowing each layer to dry completely before adding the next. Blend the new paint with the existing paint to ensure a seamless finish.


What is the difference between Lustre Paint and Emulsion Paint?

Emulsion is a type of paint, some call it latex, and it is water based. Emulsion paint comes in several gloss factors (levels).Gloss paint refers to the hardness of the finish and the amount of light reflected from it.The most common gloss factors (from least to most) are:Matte - used for ceilings and areas that do not get touched, or in some cases for the depth of color. This paint can not be washed or cleaned without ruining the finish.Eggshell - used commonly in bedrooms, living rooms and areas where there is a minimum of hand traffic. The color depth and finish are esthetically pleasing and you can wipe fingerprints and mild dirt off without marring the finish.Pearl - this is a relatively new finish that can be used in kitchens, bathrooms and high traffic hallways. Many of my clients use this in children's play rooms. Because the finish is harder you can actually wash these walls to remove dirt.Semi-gloss - This is the traditional finish for trim, and was once used in kitchens and baths because the harder finish was less permeable to water. The hardness factor allows the paint to stand up better to wear and tear and can be washed repeatedly, making it ideal for baseboards, casings, other trim work.Gloss - With the range of gloss factors available today, full gloss paint is most commonly used for furniture these days. The hardness factor makes a nice smooth, durable finish.