Remove all the loose flakes with a scraper or putty knife.
use a spackle to fill in the gaps in the surface.
Sand the surface to smooth and hit it with a coat of primer paint.
Clear primer.
Klean Strip is a highly rated brand of paint refinisher. It's designed to easily remove paint so that you can fix the mistakes you made during your "less than professional" application.
You shouldn't do this. Where verdigris is thickest is where your copper pipe is going to soon have a pinhole leak. If you paint it, it's much harder to fix in emergency.
Unfortunately, you have to sand off the run then paint it again. Depending on the paint type, you should use emery paper and keep it wet while you sand.
It is best to prevent brush strokes, than to "fix" them afterward. If you know the correct way to paint cabinets, you can avoid many such problems. Thinning your paint down, is one such preventative measures. I know this is not what you want to hear, bit if the brush strokes are very noticeable, you may have to repaint the cabinets. The best "quick fix" I know is to lightly sand the surface to remove the marks and attain a smooth surface and reapply a top coat. - You will have better results if you remove the doors from the cabinet and paint them when they are flat. The paint tends to "level" itself better. Also, try not to paint on an extremely hot/dry day.
There are a great many ways in which you could fix interior car paint. You could just paint over the spot for example.
To fix paint that has peeled off the wall, you will need to scrape off the loose paint, sand the area smooth, apply a primer, and then repaint the surface with matching paint.
sandblast and paint or weld in new sheetmetal then paint
Bathtub paint can peel due to moisture, improper surface preparation, or low-quality paint. To fix it, you can strip off the old paint, sand the surface, apply a primer, and repaint with a high-quality bathtub paint.
To fix peeling wall paint, you should first scrape off the loose paint, sand the area smooth, clean the surface, apply a primer, and then repaint the wall with a fresh coat of paint.
Use a marker, paint brush or spray paint
To fix running spray paint on a surface, you can try lightly sanding the area and then applying a fresh coat of paint to even out the surface. Make sure to follow the instructions on the paint can for best results.
To fix spray paint drips on your project, you can lightly sand the drips with fine-grit sandpaper, then apply a thin layer of paint to blend it in with the rest of the project.
To fix ripped paint on a wall, you will need to sand down the damaged area, apply a primer, and then repaint the section with matching paint. Make sure to blend the new paint with the surrounding area for a seamless finish.
To fix paint streaks on walls, lightly sand the streaks with fine sandpaper, then apply a new coat of paint using a roller in a smooth, even motion. Make sure to feather the edges of the new paint into the existing paint to blend it seamlessly.
First of all you are getting wrinkles because its natural at a certain age and you cant really fix that you will always have wrinkles no matter what you do, even if you using serums or survey.
To fix fresh paint that was peeled, you will need to remove any loose paint debris. After removing, the area will need to be sanded down. You will also need to apply primer to the area.