In order to get a 350hp or more from a 350sbc you need to make sure your compression is even across all 8 cyl and is an acceptable #. The next big thing is you will need high flowing heads, if possible also with a smaller chamber. this will let your engine get more air and fuel into a smaller area ... then you will be in the area of hp you want. A cam will work greatly to your advantage with the new heads.
Yes you can, I have just completed a 04 complete change over I installed a Chevy 350 440 hp with a 700r and a 8.8 ford rear and a 4 link set up.One little snott slinger.I think this is the first in the country. Rick Ramsey Baltimore Maryland rramsey@bcpl.net
No it denfinately will not
408 and it really cant handle that
yes
4.000 inches -- same bore size as a Chevy 350, the difference is a 327 uses a 3.250 stroke and the 350 uses a 3.480 stroke.
175 hp
350 hp Chevy engine small block made in Canada!
165 HP @ 3800 RPMS
255 HP and 335 Pounds of torque
Truck or car truck 210 hp
From the factory, they ranged from 145 hp to 370 hp.
ADVERTISED HP. from factory. The 350 TRUCK engine has: 165 HP. @ 3800 RPMs.
250 to 350 hp depending on what model
can i have apart nembers the the rebeld 350 engine to get ahi hp
A stock 350 CID Chevy will put out anywhere from 150 hp to about 300 hp, depending on when it was made. Or if it is fuel injected the power ratings may be higher.
245 hp.
factory HP in pre-1988 - - around 280-300 HP depending on carb. Nascars 350's - - over 850 HP.... if you've got the cash.