answersLogoWhite

0

Is the paint itself bubbling? Then wipe it off, it's not the right kind of paint. (you need a primer that sticks well to the original surface).

Is the wall paper bubbling? It will probably go back to normal when the paint dries.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Art & Architecture

How do you get rid of the bubbles in a newly painted pool with water in it without hurting the paint job?

Blisters in the paint job? Poor preparation was the result of that. Drain the pool, re-prep the pool walls etc and repaint. Hmm, why did you paint the pool? Was it painted before?


What to do with air bubbles under newly painted interior walls?

Quick Fix:If you only want to get rid of the look of the bubble you can use a needle to let the air out of the bubble and apply some kind of pressure on it to hopefully have it show a bit less... However this is really more of an aesthetic fixHow to properly fix a bubble:There are 2 reasons why a bubble would show on a freshly painted wall.1- If it's only the last layer of paint that's bubbling, the reason it's doing is because of a lack of adherence (grip). To properly fix this you need to scrape off the peeling paint, clean the surface (or sand), apply a bonding primer, apply a bit of drywall compound to repair the wall and repaint over.2- It there are multiple layers forming the bubble (the way to find out is if you can see the bare wall once you remove the bubbling paint), this means that the original paint film did not properly adhere to the surface... and the more coats of paint you apply on top of it, the more it pulls on the original coat of paint. This happens more often on Plastered Walls either because it wasn't given enough drying time... or no primer was used. Either way, this is potentially a big problem and would be best to have a qualified painting contractor go over to asses.


What is wedging clay?

Clay wedging is the act of preparing clay for the pottery wheel in order throw your pottery. wedging is accomplished by kneading the clay, usually on a plaster surface, until the clay is uniform in moisture and texture. Some potters like to cut the mass of clay and slap it down hard on the surface and then slap the 2 pieces of clay together with force. The idea is to get rid of any air bubbles and to make the mass of clay evenly moist. This will help the potter to form the clay on the wheel with interference of trapped air bubbles or hard lumps of clay which will cause the piece to be uneven. Also, air bubbles can explode when the piece is fired, especially if the piece is not bone dry.


On an interior wall do I wash the wall first or spackle first?

Yes! You should make sure the wall is clean and free from dirt and dust and any loose particles. Then spackle. After you sand and smooth the spackle, you will probably have to wipe down the walls again to get rid of dust.


Can you get rid of warts with hand sanitizer?

Hand sanitizer will not get rid of warts.

Related Questions

How do you get rid of the bubbles in a newly painted pool with water in it without hurting the paint job?

Blisters in the paint job? Poor preparation was the result of that. Drain the pool, re-prep the pool walls etc and repaint. Hmm, why did you paint the pool? Was it painted before?


Would a bookshelf blocking the wall prevent a painted wall from drying off gaassing getting rid fo toxins?

The bookshelf blocking the wall is not preventing paint from drying and keeping toxins lingering. There has been more than enough time for the paint to dry.


How do you get rid of black bubbles in bubble witch saga?

To get rid of black bubbles in Bubble Witch Saga, you need to pop them by matching the bubbles of the same color. Try to aim carefully and strategically to create clusters and clear them quickly to progress through the levels. Utilize boosters and power-ups to help you get rid of these challenging black bubbles.


How do you get rid of the bubbles in your ears from pressure change in an airplane?

Chew gum or suck on a breath mint. When you swallow it will help equalize the pressure changes in your ears and get rid of the "bubbles".


What should you do to get rid of hard water?

You should use Scrubbing Bubbles or Lysol to get rid of the stuff.


How can I effectively get rid of bubbles in water?

To effectively get rid of bubbles in water, you can try gently stirring the water or letting it sit for a while to allow the bubbles to naturally dissipate. You can also try using a defoaming agent, such as a drop of cooking oil or a commercial defoamer, to help break down the bubbles.


How do you get rid of an air bubble in your ear?

Normal bubbles? If you mean normal, floating soap bubbles, POP THEM!


How do you effectively get rid of bubbles in a liquid solution?

To effectively remove bubbles from a liquid solution, you can gently stir the solution, apply heat to the solution, or use a vacuum chamber to remove the bubbles.


How do you get rid of bubbles in a humidifier?

To get rid of bubbles in a humidifier, try the following steps: 1. Ensure the water reservoir is filled properly and not overfilled. 2. Clean the humidifier according to the manufacturer's instructions to remove any buildup or debris that may be causing the bubbles. 3. Use distilled water instead of tap water to prevent mineral deposits that can create bubbles.


How do you make hockey tape stick to the stick?

This is a pro technique (I read it in an interview with Jordan Eberle [from the Edmonton Oilers]): Use a puck to smooth down the tape to get rid of any air bubbles.


How do you get rid of air bubbles in contacts?

The best way I have found it to slowly close your eye and the gently rub your eyelid in a circular motion to get the bubble out. If you blink too quickly, the contact might fall out.


How can you get rid of lime and mineral deposits on your painted boat surface?

Vinegar is the only safe solution for removing lime deposits from painted surfaces.