Hey April==This is a pretty big job. Take the window crand and inside door handlw off and any screws you can find that hold the trim pad on. Then with a special tool available at the parts store, take the retainers loose from both sides and across the bottom of the pad and remove the trim pad. Then you have to take part of the linkage loose inside th edoor and remove the window channel and install it on the new glass. There are a lot of very sharp edges inside the door that can cut you pretty bad {from experience} so be careful.. You might want to just take it to the trim shop. GoodluckJoe
There are some jobs that are best left to the pro's. This is one of them. They replace the windshield for about the same as you would pay for the glass. Why do it yourself when they can do it so much better!?
which window?, and whats wrong with it?
first install new carb gasket to intake manifold and then 4 nuts hold the carb to the intake studs and then install the throttle linkage to the carb.
frederic remington 1974 lithograph art
how much would a 1974 dodge dart custom in good condition with 85 thousand miles be worth?
Chevrolet 350s are REAL easy to upgrade to electronic ignition because there are so many of them, there's a vast number of aftermarket parts available. The easiest way is to buy an MSD Ready to Run distributor, install it and be happy. You can plug an MSD 6A box into it, but you don't have to.
which window?, and whats wrong with it?
Toledo Window Box was created on 1974-07-20.
Confessions of a Window Cleaner was created on 1974-11-08.
Yes, if they don't you can install them.
West Yorkshire Passenger Transport Executive was created in 1974.
South Yorkshire Passenger Transport Executive was created in 1974.
245 HP @ 4000 RPMs.
put in a new relay... if the window works it was a bad relay
no
It's under the rear seat, behind the passenger.
It is under the hood on the passenger side firewall.
yes