0
No power is used. The lamp in the light fixture is the load of the circuit. The load resistance is what makes the current flow. When the current flows through the filament's resistance, heat and light are generated. With no lamp in the fixture, the circuit's voltage potential is still at the socket contact points and if touched could cause you a shock. This is a good reason to shut the fixture off at the switch when removing the burnt out bulb and replacing it with a new one.
What else can I help you with?
What is the alt code for light bulb?
you can make a light bulb by holding alt + 20.
HOW did the light bulb make life better?
The light bulb is safer and easier to use than gas lamps, and electricity is easier to distribute for the purpose of street/home lighting than gas. A cheaper, safer, and easier means of bringing light to the darkness was born with its invention.
What is inside in light bulb?
That powder is Talc, it is used to coat the inside of the bulb to make the light more opaque so that it is less harsh on the eyes.
How do you make electricity out of a light bulb fifth grade projects?
You would need tin foil ,3 volt battery and a bulb.First you wrap the tin foil around the battery and then attach the bulb your switch will be the opposite side where you place the bulb,if you press i will turn on and if you leave it will turn off.I hope that's helpful.
What important improvement did Edsion make to Joseph Swan's light bulb?
the dubion
How do you make a light bulb in alchemy?
Electricity + Glass = Light bulb
How do you make electricity with old foods?
you can make electricity by using food if you make an electric circuit and connecting it to an light bulb and when the light turns on you have electricity
A complete what is needed to make a bulb light up?
To make a light bulb light up, you need a closed electrical circuit. This circuit typically consists of a power source (such as a battery or outlet), wires to carry the electricity, and the light bulb itself. When the circuit is complete and electricity flows through the bulb, it will produce light.
What should be done to light a bulb?
To light a bulb, you need to connect it to a power source such as a battery or electricity supply. The electricity will flow through the bulb's filament, creating light energy and causing the bulb to illuminate. Make sure the connections are secure and the bulb is functioning properly.
Can aluminum foil make a light bulb work?
No, aluminum foil cannot make a light bulb work. Light bulbs require electricity to illuminate, and aluminum foil is not a source of electricity. Placing aluminum foil on a light bulb can be dangerous and risk causing a fire.
What uses light energy to make electricity?
to give load from bulb to ballas
What is the most commonly used way to make light?
Before the light bulb was invented, people used lanterns, candles, and fire for light. Today, with all the technology going on, we use electricity to produce light such as for the light bulb. So the most commonly used way to make light is by electricity.
What three objects make a light bulb glow?
A light bulb requires a power source (electricity), a filament (usually made of tungsten) within the bulb, and a vacuum or inert gas environment in the bulb to prevent oxidation of the filament. When electricity flows through the filament, it heats up and emits light, causing the bulb to glow.
What did you do to make light bulbs glow dimmer?
To make light bulbs glow dimmer, I reduced the amount of electricity flowing to them by using a dimmer switch or a lower wattage bulb. This decrease in electricity causes the filament in the bulb to emit less light, resulting in a dimmer glow.
How can you make a circuit to find out if an object is an insulator or a conductor?
You can create a simple circuit with a battery, a light bulb, and wires. Connect the wires to the battery and light bulb, then touch the ends of the wires to the object in question. If the light bulb lights up, the object is a conductor as it allows the flow of electricity. If the light bulb does not light up, the object is an insulator as it does not allow the flow of electricity.
What transformation did electrical energy undergo to make the bulb glow?
The electrical energy was transformed into light and heat energy in the light bulb, causing it to glow. This transformation occurs when the electricity passes through the filament in the bulb, producing light and heat as a result of the filament's resistance to the flow of electricity.
How do you make a light bulb in little alchemy?
Light and glass. Light: electricity (Energy + Metal) Energy: Fire + Air Metal: Fire + Stone Stone: Air + Lava Lava: Earth + Fire Glass: Fire + Sand Sand: Stone + Air Your welcome :)
