This is a specialist job and needs to be handeled by one, Sometimes the head needs to come off. Take it to a garage.
Lacquer thinner will possibly remove it, chemical stripper will definitely remove it.
If you have stripped your furniture and there is still too much stain showing on the surface you should first rough sand the project to remove any un-wanted blemishes and roughness then use household bleach followed by light sanding. Remember at this point the more you sand the more the old stain will be exposed.
Depends on which pulley but most have several bolts holding them on. You can remove the broken bolt or simply not worry about it.
drill off the head remove whatever it held down use vicegrips to remove the rest becarful not to drill to deep or brake the saft off or youll have to drill and tap out the hole for another size screw
get a tap and die set and follow the instructions.
You will have to take the 2001 Chevy Malibu to a mechanic to have stripped and broken plugs removed. It needs a special tool to get the broken ones out.
Sears sells a special socket to remove rusted, stripped and broken nuts.
Unless the glass is broken then there is no reason to remove it. If you have a problem it is possibly the motor or regulator.
To remove a stripped hex screw, you will need a screw extractor tool.
like you do in any other vehicle
To remove a stripped Phillips screw, you will need a screwdriver with a slightly larger size than the stripped screw head, or a screw extractor tool specifically designed for removing stripped screws.
To remove a stripped hex bolt, you can use a tool called a bolt extractor. This tool is designed to grip onto the stripped bolt and turn it counterclockwise to loosen and remove it. Simply insert the bolt extractor into the stripped bolt and turn it with a wrench or socket until the bolt comes out.
If the bolt is stripped, you can try using a different tool or method to remove it, such as using a screw extractor or tapping a larger size bolt into the stripped hole. If these methods don't work, you may need to seek professional help to remove the stripped bolt.
To remove stripped allen screws effectively, you can try using a rubber band or a screw extractor tool. Place the rubber band over the stripped screw and use the allen wrench to try and turn it. If that doesn't work, use a screw extractor tool to grip onto the stripped screw and turn it counterclockwise to remove it.
A stripped hex screw hack is a method used to remove stripped screws with a hexagonal head. It involves using a rubber band or a piece of steel wool to create friction and grip on the stripped screw, allowing it to be turned and removed. This hack can be effective in situations where traditional screwdrivers or pliers are unable to grip the stripped screw.
A stripped allen key extractor is a tool used to remove stripped or damaged allen screws. It works by gripping onto the damaged screw head and turning it counterclockwise to loosen and remove it.
To remove a stripped hex screw using a hex screw extractor, first drill a small hole into the center of the stripped screw head. Then, insert the hex screw extractor into the hole and turn it counterclockwise to grip the screw. Finally, use a wrench or pliers to turn the extractor and remove the stripped screw.