Yes, with a special enamel used for that purpose. ------------------------------ Yes, it is best left to a professional to paint it electrostatically with epoxy enamel (or other) paint. They do it in your home without having to move the tub. It not expensive.
Enamel paint can be used on porcelain or iron bathtubs with great results, so I'll walk you through this process, just in case you're unsure about how to do this.You Will Need These MaterialsWhite vinegar WaterTowel Palm sander 150-grit sandpaperRespirator mask Plastic bag Tape Epoxy enamel spray paint Oil based primer Oil based enamel paint 1200-grit wet/dry sandpaper InstructionsClean the bath tub thoroughly with a mixture of white vinegar and water. The vinegar will help remove any dirt or greasy residue on the tub. Rinse the tub to remove the vinegar and dry it with a towel.Equip a palm sander with 150-grit sandpaper. Sand the inside and the outside of the tub to roughen the surface, this will allow the paint to properly adhere to the bathtub.Remove the fixtures of the bathtub or cover the fixtures with a plastic bag. Tape the bag down at the base of the fixtures to prevent painting them when you paint the inside of the tub.Spray the inside of the bathtub with an epoxy enamel spray paint such as Krylon epoxy enamel paint. These paints are available at most home improvement stores and will resist moisture which is necessary for paint on the inside of a bathtub.5 Paint the outside of the tub with an oil based metal primer such as Rust-Oleum metal primer. Let the primer dry completely.Apply a coat of oil based enamel paint to the outside of the tub. Let the first coat of paint dry and then apply a second coat.Sand the second coat of paint with 1200-grit wet/dry sandpaper used wet. This will help shine the enamel paint.I hope this helps you out with your project! Good luck!--The Violet
you can paint over latex paint with latex enamel.
Yes, enamel paint will go over flat paint.
You can use either enamel (oil-based) paint or latex (water-based) paint. If you are using latex paint, you need to use a primer (undercoat) first. The paint store will have a special primer that allows you to paint latex over enamel. If you are going to do this, it is also a good idea to either sand the enamel paint before you paint over it, or wash it with TSP (trisodium phosphate) cleaner to remove the gloss.
Enamel or Melamine .
It will if the paint has not been baked.
A mixture of bleach, bi carb soda and Coca Cola will remove anything. But for a tarnished bath - if it has gotten into the enamel it is sometimes better to buy new enamel paint and repaint the bath white.
Yes, with a special enamel used for that purpose. ------------------------------ Yes, it is best left to a professional to paint it electrostatically with epoxy enamel (or other) paint. They do it in your home without having to move the tub. It not expensive.
To effectively remove bathtub paint, you can use a paint stripper or sandpaper to strip off the old paint. Be sure to follow the instructions on the product you choose and wear protective gear.
Got white enmal paint on two pairs of pants. Tried washing first pair did not help . Then put paint striper on paint and left for 10 min . Then soaked stained area in turpentine .The stain has decreased but is still eaisly visable. Second pair of pants put in boiling water with washing powder left for 10 min .Then brushed area with tooth brush .The paint is gone. Used this method on first pair but no result. On basis of this very in complet test . I would say ony used second method and nothing else before hand.
Enamel paint can be used on porcelain or iron bathtubs with great results, so I'll walk you through this process, just in case you're unsure about how to do this.You Will Need These MaterialsWhite vinegar WaterTowel Palm sander 150-grit sandpaperRespirator mask Plastic bag Tape Epoxy enamel spray paint Oil based primer Oil based enamel paint 1200-grit wet/dry sandpaper InstructionsClean the bath tub thoroughly with a mixture of white vinegar and water. The vinegar will help remove any dirt or greasy residue on the tub. Rinse the tub to remove the vinegar and dry it with a towel.Equip a palm sander with 150-grit sandpaper. Sand the inside and the outside of the tub to roughen the surface, this will allow the paint to properly adhere to the bathtub.Remove the fixtures of the bathtub or cover the fixtures with a plastic bag. Tape the bag down at the base of the fixtures to prevent painting them when you paint the inside of the tub.Spray the inside of the bathtub with an epoxy enamel spray paint such as Krylon epoxy enamel paint. These paints are available at most home improvement stores and will resist moisture which is necessary for paint on the inside of a bathtub.5 Paint the outside of the tub with an oil based metal primer such as Rust-Oleum metal primer. Let the primer dry completely.Apply a coat of oil based enamel paint to the outside of the tub. Let the first coat of paint dry and then apply a second coat.Sand the second coat of paint with 1200-grit wet/dry sandpaper used wet. This will help shine the enamel paint.I hope this helps you out with your project! Good luck!--The Violet
Enamel Paint or stain can be removed with turpentine just remember to use a mask because it stinks
with white spirit. (its a fact)
you can paint over latex paint with latex enamel.
To fix a chipped bathtub, you can use a bathtub repair kit that includes epoxy or enamel paint. Clean the area, apply the repair material, and let it dry according to the instructions. Sand and smooth the repaired area for a seamless finish.
To effectively remove enamel paint from a surface, you can use a paint stripper or solvent specifically designed for enamel paint. Apply the stripper according to the manufacturer's instructions, let it sit for the recommended time, then scrape off the softened paint with a putty knife or scraper. Repeat the process if necessary until all the paint is removed. Be sure to wear protective gear and work in a well-ventilated area when using paint strippers.