answersLogoWhite

0

Once you have ironed the transfer it IS NOT possible to remove it.

Firstly you must cover the transfer with a normal piece of a4 (or larger depending on the size) paper and reverse the material... you then iron onto the back of the shirt (assuming the transfer is on the chest) for about 1:30 min, or until you are sure that the transfer is extremely hot... at this point you can reverse the shirt and peel off the paper... the transfer should peel off with it.

Now if you wish to remove the residue glue, run the shirt through a wash with some nappy san..

Happy Ironing!

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Art & Architecture

How do you get a sticker off your car?

If they are fairly new they will peel right off but older ones might need some heat from a blow dryer or a heat gun, then remove the glue with paint reducer or nail polish remover ( probably the better choice ), you may have to work at it a bit to get it all, I find that gasoline on a rag will get it off as well. Use your fingers to peel up the decals not a blade of any kind. park car with the sun shining on letters, let them heat up. scrape letters off. use a safe slovent to remove residual glue. be aware that if letters have been on for any amount of time, he paint not covered by the letters will have daded and you will still see where the letters were you can usually fix that problem with a cut and polish


Will Isopropyl alcohol remove glue from plastic?

Isopropyl will remove only elmers glue from plastic, not super glue. once it gets on there, you can't remove it.


How do you remove velcro strip glue from dashboards?

Heat it first with a hair dryer. When it's warm start pulling on one end and move the dryer to point at the underside of strip, this will soften the glue. Keep pulling and it will come off. Get rid of residue with Goo Gone, it will not harm dashboards.


How do you stick holiday decorations on glass?

Use a glue gun. The glue will peel off fairly easily when you are ready to remove it.


How can you avoid a glue stain showing through a clear varnish finish?

You cannot. A glue stain, or any stain will show through clear varnish. It is always better to try and remove all stains or marks before varnishing. Almost every glue has a solvent that will remove it.

Related Questions

What type of cleaner will remove glue residue from styrofoam?

Any cleaner I can think of to remove glue will, unfortunately melt or even destroy the styrofoam.


How can I effectively remove glue residue from leather?

To effectively remove glue residue from leather, you can use a mild solvent like rubbing alcohol or acetone. Apply the solvent to a clean cloth and gently dab at the glue residue until it lifts off. Be careful not to rub too hard to avoid damaging the leather.


How do you remove glue residue left after removing vinyl top?

Laquer thinner .


How do you remove glue residue from old lace from wedding gown?

To remove glue residue from old lace on a wedding gown, you can try dabbing the residue with a cloth soaked in warm, soapy water to help soften it. Then gently scrape off the residue with a dull knife or use a cotton swab dipped in rubbing alcohol to dissolve the glue. Be very careful not to damage the delicate lace fabric during the removal process.


will this leave a glue residue?

The trim kit should not leave any residue that is visible on the outside of the range. If you do have residue, a simple solvent should be able to easily remove any residue you may have problems with. Whirlpool-MK1150XP-30-in-Microwave-Trim-Kit is very well advanced equipment and will not leave glue or any residue on operation.


How do you take weave glue out your hair?

To remove weave glue from your hair, you can apply a bonding glue remover or acetone to the affected area. Let it sit for a few minutes to soften the glue, then gently comb or pick out the glue residue. It's important to be gentle to avoid damaging your hair. Washing your hair afterwards can help remove any remaining residue.


How do you remove heat transfer glue residue from shirt?

To remove heat transfer glue residue from a shirt, you can try using a solvent like rubbing alcohol or acetone. Apply the solvent to a clean cloth and gently dab at the residue until it starts to lift off. Be sure to test on a small, inconspicuous area first to ensure it doesn't damage the fabric.


How can I effectively remove rhinestone glue from fabric?

To effectively remove rhinestone glue from fabric, you can try using acetone or a commercial adhesive remover. Apply the solvent to the affected area and gently scrape off the glue with a blunt tool. Wash the fabric afterwards to remove any residue.


How do you get gorilla glue off glass?

Scrape it off with a chisel or sharp craft knife. Remove residue with Goof -Off.


What is the composition of the residue from the production of super glue?

It's cyanoacrylate residue.


How do you remove the glue residue from an iron on transfer?

To remove glue residue from an iron-on transfer, you can try using a cotton ball soaked in rubbing alcohol or acetone. Gently dab the affected area to dissolve the glue, then wipe it clean with a damp cloth. Repeat the process until the residue is gone. Alternatively, you can also try using a commercial adhesive remover specifically designed for fabric.


How do you clean glue from stickers off whirlpool range?

Use Goo Gone or Goof Off, either will remove sticker residue.