Well, my parents put polytex on the ceiling in the lounge room, dinning room and kitchen. It was starting to peel in places. The best way I've found to remove it is with a chisel. A paint scraper is too flexible, you want something more solid. And a heat gun helps a lot too.
But I must say be prepared for a long, slow process. But, it's worth it. Good luck.
Wayne.
Lacquer thinner will possibly remove it, chemical stripper will definitely remove it.
remove trim, remove clock, remove clock light harness, and remove and replace clock light bulbs
Remove the tire and wheel. Remove the brake assembly and rotor. Remove the axle end cap. The rear hub assembly will come off.
You remove the trucks and then just take them off.
Isopropyl will remove only elmers glue from plastic, not super glue. once it gets on there, you can't remove it.
Will remove.
remove heater bezzel (remove knobs and remove two Philips screws.) just pull out, do not remove. then unclip and remove stereo bezzel.
you spell remove like this (remove)
Remove four bolts that hold transaxle remove belt pulley and belt guard. remove shift linkage remove spring tensioner. then remove whole transaxle. Remove four bolts that hold transaxle remove belt pulley and belt guard. remove shift linkage remove spring tensioner. then remove whole transaxle.
Remove driveshaft, remove pinion nut, remove rear cover, remove axles, remove differential. Push pinion out through housing.
The future tense of the verb remove is simply "will remove."Ex. We will remove the desk from your office tomorrow.
To remove text, remove blocks.
you can not remove it.
You will need to remove the transmission. Remove the clutch plate retaining bolts. Remove the clutch linkage. Remove the clutch retaining bolts.
remove the oil remove coolant remove any hoses, wires etc from manifolds remove belt and power steering pump remove the exaust pipe then manifold remove intake manifold remove valve cover remove push rods remove cyl head remove oil pan remove conecting rod caps (mark for identicle re-instalation) remove piston through top of cyl head enjoy your piston!
No such part to remove on a PT.No such part to remove on a PT.
Figured it out... Remove plastic trim from on top of radiator support. Remove grill. Remove battery & light sockets. remove 4 bolts... remove headlight assembly. Cheers