If you put a whole jar of Tang in a rusty dishwasher and run a full cycle the dishwasher comes out bright as new! Perhaps make a paste of Tang and water and scrub-brush it onto the rust stains.
Rust Stains are easy to STOP before they START. Homeowners, all over the Country, who pump their sprinkler water from a lake, pond or canal are faced with the chance of getting rust stains on their house, driveway, patio and plants. Iron particles in the water are heavy so they tend to settle closer to the bottom. If your water intake is close to the bottom of the lake, pond or canal, then you are sucking in a higher concentration of iron and you can expect to see rust on your house. The simple solution is to float your water intake closer to the surface. This is why you will see duck and geese decoys floating behind many houses in South Florida.
An illustration of this problem, and solution, can be seen at:
http://www.33029.com/ugly_rust_stain_on_my_house.htm
soak with water until it softens and thegently scrape
Ceramic tile is made from clay and other natural materials, then fired at high temperatures. It is typically more affordable and easier to install compared to granite tile. Granite tile is made from natural stone, specifically granite, which is a harder and more durable material than ceramic. Granite tile is also more resistant to scratching and heat compared to ceramic tile.
The advantages are the it comes in a huge variety of looks and most ceramic tiles are very inexpensive and easily available, glazed ceramic tile also does not stain. The disadvantage is that ceramic tile can crack if hit with a heavy item.
All ceramic tiles are made of clay. From what I know, usually the tile manufacturers have machines that cost up to 1 million dollars
One can find images of ceramic tile murals many places online. Ceramic Arts Daily, Kitchen Edit, and Deep Space Sparkle are just a few websites which offer images of ceramic tile murals.
CLR its found at most harware stores. scouring stone
It depends on the type of ceramic adhesive. Many of them can be taken off tile with lacquer thinner on a rag.
To clean ceramic tile effectively and efficiently, start by sweeping or vacuuming to remove loose dirt and debris. Then, mix a solution of water and mild detergent or a specialized tile cleaner. Use a mop or sponge to apply the solution to the tile, scrubbing any stubborn stains with a brush. Rinse the tile thoroughly with clean water and dry with a towel or mop. Repeat as needed for tough stains.
Remove the adhesive.
Vinyl tile is generally more affordable, easier to install, and softer underfoot compared to ceramic tile. It is also more resistant to stains and scratches, making it a low-maintenance option for flooring.
The best methods for effectively cleaning ceramic tile surfaces using a ceramic tile cleaner are to first sweep or vacuum the surface to remove loose dirt and debris. Then, mix the ceramic tile cleaner with water according to the instructions on the product. Apply the solution to the tile surface and let it sit for a few minutes to loosen dirt and grime. Use a scrub brush or sponge to scrub the tiles, focusing on any stubborn stains. Finally, rinse the tiles thoroughly with clean water and dry them with a clean cloth to prevent streaks.
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
A little baking soda and damp towel should do it.
To clean ceramic wall tile, mix equal parts water and vinegar to create a cleaning solution. Use a soft-bristled brush or sponge to scrub the tiles with the solution, making sure to rinse thoroughly with water afterward. For stubborn stains, you can also use a mild detergent or specialized ceramic tile cleaner.
To clean a ceramic tile floor effectively, start by sweeping or vacuuming to remove loose dirt and debris. Then, mop the floor with a mixture of warm water and a mild detergent. For tough stains, use a mixture of water and vinegar or a commercial tile cleaner. Rinse the floor with clean water and dry it with a towel to prevent streaks.
To effectively clean ceramic tile and maintain its appearance and durability, regularly sweep or vacuum to remove debris, then mop with a mild detergent and warm water. Avoid harsh chemicals that can damage the tile's finish. For tough stains, use a mixture of water and vinegar or a specialized tile cleaner. Rinse thoroughly and dry to prevent water spots.
form_title= Ceramic Tile form_header= Install ceramic tile in your home! Where would you like the ceramic tile installed?*= _ [50] Do you need the ceramic tile to be custom cut?*= () Yes () No () Not Sure What type of tile do you what installed?*= _ [50]