answersLogoWhite

0

i have a 95 blazer also. jack it up, disconnect the drive shaft, take off the shocks, cut the u-bolts. they r probally to rusty to unbolt. let the diff. drop. take off the diff cover, take the diff apart, and pull it out. install opposite of removal. its really not that hard.

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Art & Architecture

Will a 98 Subaru Forester Transmission fit a 99?

Yes, it will fit and mount up just fine. But you will have to make sure the front differential gear ratio matches that of your rear differential. Or what you could do is swap the transmission from the Forester along with the rear differential from the Forester


Abs speed sensor location?

On the top of rear differential. Some vehicles have one at each front and rear wheel. Some vehicles have one at each front wheel and one on top of rear differential. Depends on the vehicle. The year, make and model info would help.


What is an example of a universal joint?

There are two U-Joints that are easily visible on a rear wheel drive vehicle. The driveshaft on a rear wheel drive vehicle has a U-joint at each end, just forward of the differential (the pumpkin-sized metal assembly on the rear axle) and near the transmission.


How much would it cost to replace a rear bumper on a 2007 Ford Focus Parts paint and labor?

It is important to know the general cost to have a shop repair a car. The general cost to repair a rear bumper on a 2007 Ford Focus is between $200 and $400.


Why would the back window on a 1996 Chevy Blazer not open when you push the button to open the hatch?

The blazer must be in park for the rear hatch button to work. If you have the blazer in drive the button will not open the hatch unless it is in park!!! If there is still a problem maybe try checking the fuses! The actuator could be broken in the rear that releases the window so you can open the back. This happened to my 2003 Blazer and my neighbor's 2002 Blazer. By removing the back panel (high likelyhood the panel will break when you remove it) and replacing the actuator that could solve your problem. Both I and my neighbor would have had to order the whole actuator in order to replace the tiny plastic piece that broke. Instead we drilled a whole and rigged it with some tough wire. Works now but we both have broken back panels...even the dealership broke one. Good luck. SEE RELATED LINK for 1997 Blazer

Related Questions

What does your 1986 blazer have for a Differential?

That is your rear axle. It delivers the power to your tires.


How do you repair a rear defrost on a Chevy Blazer?

rub it


How much does it cost to replace the rear differential in a subaru impreza?

how much does it cost to repair the rear differential in a subaru outback


What weight gear oil for rear differential on 2000 Chevy Blazer?

80w-90


How do you service 4wd on a 2003 Chevrolet Tahoe?

Repair Rear Differential Parts


How do you stop a fluid leak from the rear of a transmission on a 2000 Chevy blazer?

change ur rear differential gasket or ur transfer case is leaking


Where are the rear gears n a 1995 ford bronco?

On a 1995 Ford Bronco : The rear gears are INSIDE the rear differential ( pumpkin ) located in the middle between the 2 rear wheels


What weight gear oil for rear differential on 1996 blazer?

For a 1996 Chevrolet Blazer, the recommended weight for rear differential gear oil is typically 75W-90. If the vehicle has a limited-slip differential, you may also need to add a friction modifier to ensure proper performance. Always check the owner's manual for specific recommendations and any manufacturer updates.


What weight fluid does a1998 Chevy blazer take in front differential?

80 w90 gear oil front and rear!


What are the 1995 Chevrolet 1500 rear differential torque specs?

20 ft lbs


What is the difference in rear drive shafts for a 1995 and a 1996 Chevy blazer s10?

nothing


Where is the starter located on a 1995 Chevy Blazer XL?

At the left rear under the engine.