0
on a 2wd you take off the tire then theres a cap in the middle of the rotor take it off take the pin out its a cotter pin take the nut off then carefully take the rotor off one set of bearings should come off with the rotor after you get the rotor off the other bearings will be exposed grease them or replace then the reverse the procedure
What else can I help you with?
How do you replace a wheel bearing assembly on a Chevy G20 Van?
Front or rear?
How much to replace front wheel bearing 2011 impala?
The front wheel bearing assembly by Moog from Advance Auto Parts, $150. Labor 1 to 1 1/2 hours.
How do you replace the front wheel bearing on a 2003 Pontiac vibe GT?
Take off the steering knuckle and press out the bearing and hub.Have the new bearing pressed in with the hub and re install the knuckle.
Where is the brake master cylinder on a 1999 Chevy Venture?
in the engine area directly in front of the steering wheel
How much should it cost to replace front wheel bearing on a 1998 trail blazer?
I paid $495.00 dollars
How do you replace a wheel bearing assembly on a Chevy G20 Van?
Front or rear?
How do you replace front wheel bearings on a 2001 Chevy Impala?
Remove the tire and wheel from your 2001 Chevy Impala. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing. Reverse the process to install the new front wheel bearing.
How do you replace front wheel bearing assembly on 1999 Chevy Tahoe with 4 wheel drive?
Here is a link to some good instructions. http://reviews.ebay.com/ebaymotors/Chevy-Silverado-4x4-Front-Wheel-Hub-Bearing-Replacement_W0QQugidZ10000000002536494
How much does it Cost to replace front wheel bearing 2004 Chevy Malibu?
Depending an where you live and which shop you have do the work about $300.00
How do you replace the front wheel bearings on a 97 awd Chevy astro van?
Remove the tire and wheel from your 1997 Chevy Astro. Remove the axle end. Remove the wheel bearing nut. Remove the wheel bearing and the wheel seal. Reverse the process to install the new front wheel bearing.
How do you replace front wheel bearing on 1996 Hyundai Elantra?
how to replace front wheel bearing on 1996 Hyundai elentra
How do you change a 2005 Chevy silverado front wheel bearing?
It's a sealed unit with the hub. You have to replace the whole hub assembly.
How do i replace front bearing on 2003 Citroen rely?
You can replace the front bearing on 2003 Citroen Relay using air tools.
How do you replace a front wheel bearing on a 2000 Chevy blazer?
To replace the front wheel bearing on a 2000 Chevy Blazer, first, lift the vehicle and remove the front wheel. Next, detach the brake caliper and rotor to access the hub assembly. Remove the hub assembly by unscrewing the retaining bolts and pulling it off the spindle. Finally, install the new bearing by reversing the steps, ensuring everything is torqued to the manufacturer's specifications.
What size is the front wheel bearing hub nut on a 1998 Chevy blazer s10 4x4?
36mm. You will also need an 18 mm box wrench to replace the bearing assembly.
How do you replace a front wheel bearing on a 1992 Chevy silverado 1500?
You will need to remove the tire and wheel. Remove the axle end cap. Remove the wheel bearing seal. Remove the wheel bearing. Reverse the process to install the new will bearing.
What are the tools and procedures needed to replace a front drive wheel bearing on a 97 Chevy Cavalier?
Make darn sure it isn't the tire first. Take the strut off, and have the bearing pressed.
