answersLogoWhite

0

From under the hood behind the headlight you can see where the bulb snaps in un snap it pull it out and there's your bulb, get the number off of it and replace , cost about $10 , I did this about two months ago...

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Art & Architecture

What type of light bulb do you use for a 2002 celica gts interior bulb?

I have a 2001 celica and it uses a 10watt type E bulb.


How do you change replace headlight bulb on 2007 Chevy Impala and what headlight bulbs does it take?

2007 Chevrolet Impala headlight bulb replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).


Replace 2005 Chevy Tahoe passenger side headlight?

Open the hood and then examine the top of the headlight assembly and locate the two pins that can be pulled up and out of the assembly. Then rotate the headlight Assembly out of the front of the grille and change the headlight bulb...reverse the process


How to replace the Headlight Assembly on a 2000 Toyota Celica GT?

If you mean replace the headlight bulb they can be removed and replaced by opening the hood. Look at the back of the headlight - there are two separate bulbs for high and low beam on each side. There is a rubber cover on the back of the headlamp for each bulb that needs to be removed. If you mean replacing the entire headlight assembly then you need to remove the front grill and the front bumper cover.


How do you Replace bulb in headlight of 1992 Dodge Spirit?

The first thing to do is go and buy the replacement bulb. Behind the headlight there is a round ring unsrew it pull out the bulb (which is attached to the wires). When you look at the old bulb base and your new replacement you will know what to do. Just unplug the old bulb housing and plug in the new.Putting the round ring and bulb housing back on can be a chore but it just just takes a little time.