Let me first say, I am not familiar with the 98, BUT if it is like the 2000 then you are in for a real treat. The 2000 2.4L is equipped with a water pump that is down and rear on the belt, thus it is buried and requires the exhaust manifold and timing to be removed/altered. It is a real gem and most places around here won't do it for less than 600 labor. If you want to do it yourself, here's what one mechanic told me....He said it was easier to remove the engine and do it. I've been a mechanic for 15 yrs and it is one of the worst designs I have ever seen.
Parts and labor, aprox $500.
How do you replace the water pump on a 2004 Kia Rio 1.6L DOHC?
The bearing is on its way out. Replace the pump soon.
diagram of what connects to water pump for 1997 grand am
THE WATER PUMP ON THE ACCORD IS DRIVEN BY THE TIMING BELT AND YOU WOULD NEED TO REMOVE AND REPLACE THE BELT AT THE SAME TIME AS THE WATER PUMP
Off the water pump
Pay a mechanic to replace it
generally, if you know that the pump is bad or failing, replace it. Repairing it is rarely an option. That's why there's a core charge on them. They are returned for factory refurbishment.
To replace the windshield washer pump in a 1998 Pontiac Sunfire GT, start by disconnecting the negative battery cable for safety. Remove the washer fluid reservoir by unbolting it, then disconnect the hoses and electrical connector from the pump. Replace the old pump with a new one, reconnect the hoses and electrical connector, and reattach the reservoir. Finally, reconnect the battery and test the pump to ensure it's working properly.
how hard is it to replace a water pump on a 1998 chevy venture van?
l
There is bolts unscrew them and the replace again
To replace the water pump on a 2003 Pontiac Sunfire, first disconnect the negative battery cable and drain the coolant. Remove the serpentine belt, then detach the alternator and any other components obstructing access to the water pump. Unbolt the water pump from the engine block, clean the mating surfaces, and install the new pump with a new gasket. Finally, reassemble the components, refill the coolant, and reconnect the battery.
Remove the belt from your 1998 Chevy 1500 water pump. Remove the water pump return hose. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
take it to a mechanic
No, just replace it.No, just replace it.
If you go to advance auto, or auto zone and purchase a haynes manual for 10 to 20 dollars, it will describe in detail (including pictures) of this repair, and many more for this automobile.