Front brakes or back> front is really simple, when you take the caliper off, the caliper is held on with 2 1/2 bolts... the rotor will come off if your going to replace that to, it will slide off the spindels when the caliper is removed... put the new pads in place and slide the caliper back on and put the 2 bolts back in to hold the caliper in place.
go to www.autozone.com,
Get a manual on your car from AUTOBOOKSONLINE.COM They aren't expensive and it will help on the next repair.
AnswerHope you wanted one for a p7100 (94-98 Cummins) Try www.genosgarage.com or www.turbodieselregister.com, if they don't have it they can probably tell you where to find it.
unhook neg battery cable then wait 10 mins for disgarge of capaciter then proceed to change ignition
If the starter is spinning but not catching, the problem lies in the starter drive (also called bendix). You will either have to replace the starter or repair it by replacing the bendix.
NO
where are the timing marks on a 94 2.5 dodge shadow es
dot 3
fuse location 7
1994 dodge shadow has a timing belt located on the right hand side of the motor. I know as I just installed a new head on my shadow.
Rev. limiter?
My 1990 Dodge Shadow ES runs 6 second flat T1.
It is driven by the timing belt inside the engine.
within 6 inches of the starter
The model from 1994-1996 top speed is 105 mph.
inspection determine what is bad. replace what is bad. bleed system. test brakes. change? how depends on what is bad. no predicting that.
Pull the old flasher fuse out and plug the new one in.