need more infor.. make/ model/ year ???
Most likely the bulb is replaced from the rear by twisting the socket out of the housing.
remove the gage cluster the bulb is on the back of the cluster
Turn on that fast blinking signal light and check to see if the front and rear signal lights are both working, chances are you have a burned out bulb. If both front and rear bulbs are flashing fast, replace the flasher relay.
Because of the creation of the light bulb you could Illuminate a room without dangerous candles Turn the lights on and off quickly It can burn for 40 hours You won't have to replace a lightbulb as often as you replace candles
You have to remove the front grille, and then remove the headlight itself and then you can access the bulbs by un-clipping the 2 retaining clips and removing the rear cover.There is an excellent video of how to do this on youtube:http://www.youtube.com/watch?v=arRJkRpC9bo
Replace front sidelight bulb on Citroen C4 how to?
shogun side light bulb
To change the front sidelight bulb on a Suzuki Baleno, first, open the hood and locate the headlight assembly. Remove the cover or cap that protects the bulb by twisting it off. Then, disconnect the old bulb by pulling it straight out and replace it with a new bulb, ensuring it clicks into place. Finally, replace the cover and close the hood.
To change the front sidelight on a 2006 Toyota Previa, first, open the hood and locate the headlight assembly. Remove the cover or connector from the back of the assembly to access the sidelight bulb. Gently twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Finally, reinsert the bulb socket, secure the cover, and close the hood.
To replace the front sidelight bulb on a 2007 Daihatsu Sirion, first, open the hood and locate the headlight assembly. Remove the plastic cover or screws that secure the assembly, then gently pull it out from the housing. Twist the bulb holder counterclockwise to release it and replace the old bulb with a new one, ensuring it is securely in place. Finally, reassemble everything and test the new bulb to ensure it’s functioning properly.
open the bonnet and unscrew the bulb housing and pop it out
From behind.
To replace the front nearside sidelight bulb on a 2000 Suzuki Grand Vitara 2L, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly, then gently pull it forward to access the bulb socket. Twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Reassemble the headlight assembly by reversing the steps and ensuring everything is secure.
Locate the bulb holder under the bonnet, then turn the bulb by about a quarter and pull out. Replace with the same bulb (W5W 12V)
To change the front sidelight bulb on a transit, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; you may need to remove the cover or unclip the assembly. Disconnect the electrical connector from the bulb, twist the bulb socket counterclockwise to remove it, and then replace it with a new bulb. Reassemble everything by reversing the steps, ensuring the bulb is securely in place and the connector is reattached.
A job for main dealer.
i have a jag x type and my sidelight bulb has blown....in looking space is limited...but has the light array a cover over it and does this unscrew..or just pull off to gain access to the bulb