answersLogoWhite

0

To wire an ignition barrel in the Citroen Saxo, begin by disconnecting the wire at the negative terminal of the battery. A lead wire has to go to the ACC terminal on the ignition barrel. The starter relay wire goes to the ST terminal and the ignition wire is connected to the IGN terminal.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do replace a headlamp bulb on a Citroen Saxo?

under the bonnet look behind the light and look for a wire trist one way and it should come out


Will a peugeot 106 gti engine fit into a citroen saxo vts?

yes all fits except i electric wire. but same colours so snip off and connect


Will a second hand saxo vtr ecu fit straight on car?

hi if you have two ecus they will be different as for some reason citroen wire the immobiliser to the ecu so when you turn the ignition on or enter a code it sends the signal (the code) to the ecu if its happy with the code you can start the car as every car has different codes it will need to be sent off to be unlocked


How do you start your 2009 suzuki z400 without the key?

Hot wire it. Take the wires out from under the ignition barrel and splice 'em together


What color is the ignition wire for a 94 cparice cliassic?

Yellow wire is your ignition wire.


What color wire is the ignition switch on a 1969 camaro?

purple is the trigger wire for the starter. Yellow is the ignition wire.


What color is the ignition wire on a 2004 Tahoe?

The ignition wire that run to the cap is red. The one that to the key ignition is blue.


How do you wire ignition in lancer?

what about the ignition switch wiring


Ignition wire color code and starter wire?

The ignition wire in a Nissan 350z is black and red. The starter wire is white/red and the second starter wire is white/green.


When the switch button fails how do you bypass motorcycle ignition wire?

If you have broke your ignition switch or lost the key disconnect the ignition barrel from the white connector plug then pull off the the key hole then with a knife peel back the casing around the wires to bear metal and wrap them together and attach the ignition back and it should be like turning the key.


Which wires are which on the ignition of a 1994 Saturn SC2?

On a 1994 Saturn SC2, the ignition wires typically include a red wire for the battery, a yellow wire for the starter, and a brown wire for the ignition. The red wire provides constant power, the yellow wire activates the starter motor when the key is turned, and the brown wire supplies power to the ignition system. It's essential to refer to a wiring diagram specific to your vehicle for accuracy and safety when working on ignition wiring.


What wire on your ignition coil on your 99 Cherokee XJ is negative?

The 1999 Jeep Cherokee ignition coil used a black wire for the negative wire. The negative wire should be on the left post.