a board Ft is equal to 12"x12" 1" so a 1 sqft at 1" is 1 board ft.
You must have your figures wrong. - 4 litres of paint will not even come close to covering 100 metres square! !
He will take away your coins and send you to the beginning.
mine did that to. my bf had to take off the dash board and test the circuit board but it may be different for u. call a auto store and ask them.
How long it takes for an aluminum can to biodegrade
3 to 6 weeks depending on which ring you choose and what you want on it.
It depends on the exposure. If you are lapping each board 1 1/4" you have a 6" exposure. This would give 6 square feet coverage per board, and would take 17 boards to cover 100 square eet (1 square) Exposure (in feet) * Length = Square foot of coverage per board 1 square = 100 square feet
Measure the length plus the width, double that number. Take that number and multiply it by the height of the base board. That will give you the number of square inches of base. Divide the number of square inches by 144 and that will give you the square feet. There are 144 square inches in each square foot.
fourteen
6084264960000 square kilometers. Give or take.
240
There are 204 squares on a traditional checker. There are 64, 1 by 1 squares There are 49, 2 by 2 squares There are 36, 3 by 3 squares There are 25, 4 by 4 squares There are 16, 5 by 5 squares There are 9, 6 by 6 squares There are 4, 7 by 7 squares There is 1, 8 by 8 square To get this all you do is take the center of each square and count down on the board that many squares you can make. The number will be the same for the other side. then you multiply those numbers to get that many squares for that size square.
64
Thirteen
122.2 square yards.
Ten.
three
36