0
What else can I help you with?
How long does it take to r and r a transmission in a four wheel drive truck?
It depends on the truck, Could be 4 hours or 10 hours.It depends on the truck, Could be 4 hours or 10 hours.
What is Tony Stewart's favorite Chevrolet?
Chevy truck.
Will a steering column from a 1988 Chevy truck work in a 1988 Chevy suburban?
Yes it will, samething
What years of Chevy s-10 truck parts are interchangeable with 1982 s10 truck?
i believe it is up to 86 maybe 88 that are the same truck.
How do you remove bench seat from 1978 Chevy truck?
Unbolt it from the floor.
How do you change a flywheel on a Chevy truck?
How do you change a flywheel on a Chevy truck? You can remove either the engine or the trans. Once you have either removed just remove the bolts holding the flywheel in place.
What is the labor time to replace headgaskets on a 2000 Chevy truck with a 5.3?
Labor book says 8.9 hours.
Where is the clutch on a 1988 Chevy truck?
It is bolted to the flywheel on your transmission
How do you torque when installing flywheel in a 1979 Chevy truck?
with a torque wrench
Will a 2006 Chevy truck fly wheel fit a 1999 Chevy blaver?
no, different trans and size of flywheel
How do you change flywheel on Chevy truck 1991?
To change the flywheel on a 1991 Chevy truck, first, ensure the vehicle is safely lifted and supported. Disconnect the battery, then remove the transmission by unbolting it from the engine and separating it from the flywheel. Once the transmission is removed, unbolt the old flywheel from the crankshaft, install the new flywheel, and torque the bolts to the manufacturer's specifications. Finally, reassemble the transmission and reconnect the battery.
What is the the starter for a 1996 Chevy truck 8 cylinder?
In front of the flywheel, on the right side of the vehicle.
What will cause a vibration on the whole truck that can be felt mostley when the truck is in park the truck is a Chevy Silverado 2005 Diesel automatic?
most likely it is a cylinder missfire it might be a broken flywheel (cracked)
What is the torque specs for a 350 flywheel for a 1981 Chevy 34 ton truck?
75 ft-lbs. Lock-Tite is recommended.
Can a flywheel on a 1998 chev truck be machined?
Yes, a flywheel on a 1998 Chevy truck can be machined, provided it is not excessively worn or damaged. Machining can help restore its surface for better clutch engagement and overall performance. However, it's essential to consult a professional mechanic to ensure that the flywheel's thickness remains within manufacturer specifications after machining. If it's too worn, replacement may be necessary.
What is Ford flywheel F4TR-6380-AA?
It is a Ford 351 windsor MT truck flywheel.
How do you change the flywheel on a 1978 gmc truck?
remove starter remove transmission unbolt flywheel
