0
An estimate of the mass of an "average" continental lithospheric plate is 40.7x1021 kg or forty sextillion, seven hundred quintillion kilograms.
It should be noted that this can only ever be considered a rough approximation of the order of magnitude of the mass of a lithospheric continental plate as there are so many unknowns. For example the exact thickness of the lithospheric plates, and the horizontal and vertical variations of density which can't be known exactly and so require the use of assumed or average values.
For the assumptions and working required to arrive at this value, please see the following:
This question is impossible to give an exact answer to as all the Earth's tectonic plates are of varying size and thickness and are composed of material that has varying densities with increasing depth.
However it may be possible to make a very rough estimate of the order of magnitude of the mass / weight of a tectonic plate as follows:
There are 8 major tectonic plates and a number of smaller ones. If it can be assumed that the major plates cover the majority of the Earth's surface (and that the minor plates are of negligible area) then it can be assumed that an average major plate has a surface area equal to 1/8 of the surface area of the Earth.
Earth's surface area = 510,072,000 km2
Average plate = 510,072,000 / 8 = 63,759,000 km2
We have to make a further assumption here about the average density and thickness of a tectonic plate in order to make an estimate of its mass and weight.
According to the Wikipedia entry (see the related links), typical Oceanic Lithosphere is on average 100 km thick and typical continental lithosphere is on average 200 km thick (obviously this varies significantly depending on the presence of mountain ranges etc. but is a reasonable assumption for a rough estimate).
Further to this an estimate must be made of the average density of both the oceanic and continental crusts as well as the upper brittle mantle which is also part of a tectonic plate.
According to the Wikipedia entry for the oceanic and continental crust, their average density is 3300 kg/m3 and 2750 kg/m3 respectively. Further to this, the upper 200-300 km of the mantle can be assumed to also have an average density of 3300 kg/m3 A
As such it is possible to estimate the mass of an "average" continental plate and an "average" oceanic plate or at least to gain an estimate of the order of magnitude.
Mass of an "average" continental plate:Average thickness of continental crust = 40 kmVolume of continental crustal portion of plate:
63,759,000,000,000 x 40,000
= 2.55036 x 1018 m3
Mass of continental crustal portion of plate
= 2.55036 x 1018 x 2,750 =
7.01349 x 1021 kg
Volume of continental lithospheric portion of plate:
63,759,000,000,000 x 160,000
= 1.020144 x 1019 m3
Mass of continental lithospheric portion of plate:
1.020144 x 1019 x 3,300
3.3664752 x 1022 kg
Total estimated mass of a continental lithospheric plate:
7.01349 x 1021 + 3.3664752 x 1022
= 4.0678242 x 1022 kg
=40,678,242,000,000,000,000,000 kg.
or 40.7x1021 kg
or forty sextillion, six hundred and seventy eight quintillion, two hundred and forty quadrillionkilograms.
Please see the related links.
Add your answer:
Earn +20 pts
Which is bigger the Northamerican tectonic plate or pacific tectonic plate?
North America is much bigger than pacific tectonic plate.From :Lyssa
Why are buildings in the middle of a tectonic plate much less likely to be damaged?
Because there are far less earthquakes in the middle of a tectonic plate. About 90% of the world's earthquakes occur at plate boundaries.
What kind of tectonic plate is the eurasian plate?
The tectonic plate under parts of Europe and Asia is a continental crustal plate.
What is the tectonic plate in japan?
Four Tectonic PlatesJapan lies over 4 tectonic plates. These are: The North American PlateThe Eurasian PlateThe Philippine Sea Plate, andThe Pacific Plate.
What isn't a tectonic plate boundary?
Any area where two or more tectonic plates do not touch each other is a not a tectonic plate boundary.
Which is bigger the Northamerican tectonic plate or pacific tectonic plate?
North America is much bigger than pacific tectonic plate.From :Lyssa
What is the difference between plate tectonic and tectonic plate?
Plate Tectonics is the process by by which the earth's tectonic plates move.
Why are buildings in the middle of a tectonic plate much less likely to be damaged?
Because there are far less earthquakes in the middle of a tectonic plate. About 90% of the world's earthquakes occur at plate boundaries.
What occurs at a dee-ocean?
what occurs when plate tectonic formwhat occurs when plate tectonic formwhat occurs when plate tectonic form
What tectonic plate is Mt Hood on?
tectonic plate for mt hood
What kind of tectonic plate is the eurasian plate?
The tectonic plate under parts of Europe and Asia is a continental crustal plate.
What tectonic plate is Indiana on?
Indiana sits on the North American tectonic plate.
What tectonic plate is Maine on?
Maine is located on the North American tectonic plate.
What tectonic plate is Virginia on?
Virginia is located on the North American tectonic plate.
How does plates affect the surface of the surface?
when tectonic plate collides with other tectonic plates or moves into another tectonic plate it affects surface in a way to create mountains. Like Himalayas are created when the indian tectonic plate collided with asian tectonic plate.
How much does a license plate weigh?
~3.3oz
Where are the tectonic plates in Greenland?
Greenland lies on the North American tectonic plate. The North American plate extends across much of North America, including Greenland, and is surrounded by other plates such as the Eurasian plate to the east and the North Atlantic plate to the west. Greenland is part of the larger tectonic framework of the Arctic region.
