5 Gallons can cost up to 100 dollars
I recently painted my land rover using polyurethane paint with rollers. Tho I say so myself I was very pleased with the result. Colin
A coat of shellac can be placed over polyurethane. You should use de-waxed shellac if you plan on placing more polyurethane on in the future.
Yes, as long as the polyurethane is oil-based.
Can you put stain in polyurethane to darken the color?
Polyurethane are recyclable, therefore, old, used or spent polyurethane should be sorted and recycled. we need to bear in mind that it takes more than 100years for polyurethane products to decay. Also, they are not biodegradable. Therefore, recycling is the way forward and in the case of some special polyurethane products such as Hospital wastes and the likes, the wastes should be treated before recycling. Olaoluwa Ogunfeyitimi
About $80 to rent a floor sander and polyurethane is about $25 a gallon. So depends on how big of an area
Polyurethane typically takes about 24 hours to dry completely.
Polyurethane will give a long lasting easy to apply finish. Use a water based polyurethane ans clean up will be much easier. You should get years of wear from a good polyurethane finish.
When applying water-based polyurethane over oil-based polyurethane, the main differences lie in the drying time, odor, and color. Water-based polyurethane dries faster, has a milder odor, and may not yellow as much over time compared to oil-based polyurethane.
To determine how much polyurethane you need for your project, calculate the surface area of the project and refer to the manufacturer's instructions for coverage per square foot. Multiply the surface area by the coverage per square foot to find the total amount of polyurethane needed.
Polyurethane can be recycled.
You can apply "oil" based polyurethane over "oil" based enamel, you can also apply "water" based polyurethane over "water" based enamel, never mix the two, there's to much of a chance for problems.
The amount of polyurethane needed for optimal protection and durability of a floor depends on the type of floor and the manufacturer's recommendations. It is generally recommended to apply 2-3 coats of polyurethane for best results.
Yes, polyurethane is paintable.
it should
Otto Bayer invented polyurethane.
Yes, water-based polyurethane can be applied over oil-based polyurethane after proper preparation and sanding.