What kind of paint is it? Follow the manufacture's instructions; paint sellers usually have a product sheet that is really the instructions for mixing and using (spraying). Rule of thumb: when you add reducer stir ell and when finished strring count the seconds it takes for the paint on the stir stick to start dripping; no fewer than 8 seconds, no more than 25.
A mixing ratio given as 4:2:1 normally means 4 parts of base product, 2 parts thinner/reducer, and 1 part hardener.However, some paint manufactures add hardener second, and thinner/reducer last.
You can add pigment, but if it is already a definite colour it won't change much.
Add a little talcum powder to the paint.
1/2 gallon the formula is 2:1
Flood makes products that will thin the paint without degrading the paint. Use Flotrol for latex paint and Penetrol for oil-based paints. Follow the directions on the label to determine how much product to add to your paint.
A mixing ratio given as 4:2:1 normally means 4 parts of base product, 2 parts thinner/reducer, and 1 part hardener.However, some paint manufactures add hardener second, and thinner/reducer last.
if you are talking about paint as in liquid paint you can add light brown into it make sure the brown is a light shade and don't add to much
Automotive paint is made up of many different colored "toners" which are essentially pure colors of paint made up of pigment, solvent and resin. These colors are mixed together to reproduce any other color. Auto paint manufacturers generate formulas which instruct the person mixing the paint of how much of each toner to add in order to reproduce the desired color. After the color is mixed in the case of basecoat it is simply reduced (thinned) with solvent. In the case of single stage paints and clear coats that color (or clear) is not only mixed with reducer but also a catalyst (hardener) to cause an interlocking process known as a chemical drying process which makes this paint resistant to other solvents and contaminants, this keeps the auto paint from ever wiping off when re-wetted with a solvent.
You can add pigment, but if it is already a definite colour it won't change much.
add a PH reducer chemical
You add an equal amount of green paint. This is the same as adding half as much of both yellow and blue paint. This means that if you have 2 pumps of red paint you can add either 2 pumps of green paint OR 1 pump of yellow paint and 1 pump of blue paint.
well you can add water to 1 paint and then add no water to another paint then mix together. THEN YOU CAN PAINT BUT GO OVER THE PAINT A ROUGH 10 TIMES AND THEN YOU HAVE SHIMMERY PAINT.
To tone down yellow paint, you can paint over it with a different color. You can also add white to the paint.
add blue
add a blue pigment to white paint
Add a little talcum powder to the paint.
Add white paint.