It differs from camera to camera, but using a USB cable and the software provided, it's fairly easy. The manual that came with the camera should have the instructions, but if you don't have it, go to the manufacturer's website and look for the manual for your make of camera there. You should also have a USB cable that goes with the camera if you wish to install it. You will need a driver for the camera, and that usually comes on a CD with the camera. Again, if you don't have this, look at the support section of the manufacturer's website for a driver for your camera model. If you have the CD or have downloaded the driver, I suggest you follow the instructions in the manual. However, if you cannot obtain the manual, plug in your camera to the USB port and turn the camera on. In XP or Vista, the found new hardware wizard will come up and it will look on the CD for the driver, or you can specify the location of the downloaded driver. The wizard will install it properly and you can start using it. The device should turn up in video capturing applications such as Windows Movie Maker.
Alternatively, if you have a DV port on your camera, a DV port on your computer, and a DV cable, you can capture video without installing it. All you need is a DV driver installed on your PC.
Wet photography is using film, chemicals, darkroom and photographic paper. (Since the chemicals are wet.)Dry photography is using digital camera, computer and printer.
Digital photography is a form of photography that uses an array of light sensitive sensors to capture the image focused by the lens, as opposed to an exposure on light sensitive film. The captured image is then stored as a digital file ready for digital processing (colour correction, sizing, cropping, etc.) Now the important thing is will digital make you a better photographer ? and should you go digital ?
Photo filters are used to protect the camera lens from scratches but can also cause a distortion of the image as well, causing the picture to be flawed.
Digital photography noise is a common occurrence in photography when the setting of the ISO is too high or if you are using a cheap digital camera. When you press the shutter on your camera, light hits the sensor, and an analog signal is produced, which is converted to a digital image. If, during this time, something messes up the particles creating the analog signal, then noise is produced. Noise can be reduced in Photoshop www.goldprints.com
Photography using film, rather than a digital camera.
Digital image is depending on the camera resolotion, where optical image depends on the quality of the film. Normally an optical image will be better then a digital image, unless you are using high end digital camera. I hope this helps, Icko www.rtgallery.com
Answering "How do you transfer photos from a digital camera to your email in box using a USB connection from camera to shared computer?"
Digitizing an image involves capturing it from paper using a scanner for presentation and storage on the computer. On the computer, the now-digital image can be improved image processing tools.
Using a digital camera. You then upload them to the computer. Or, if you use a film camera, you can scan the pictures into the computer on get the photos put on a disc which you can upload to the computer
In modern photography techniques, pictures are developed using digital technology. Light is captured by a digital sensor in the camera, which then converts the light into electronic signals. These signals are processed by the camera's software to create a digital image file, which can be viewed and edited on a computer or printed out as a physical photograph.
Image artifacting in digital photographs can be minimized or corrected by using higher quality camera equipment, avoiding excessive image compression, adjusting the image resolution and sharpness settings, and using image editing software to manually remove artifacts.
It is the processing (changing) of color images using a computer.
Using USB PTP for transferring images from a digital camera to a computer offers advantages such as faster data transfer speeds, direct access to camera settings, and compatibility with various operating systems.
To enlarge an image without using a photocopier you can:take a picture of it with an old fashioned camera, develop it and print an enlargement, orscan it and process it on a computer, printing it with your computer printer.
A DSLR camera works by using a mirror to reflect light through a lens onto a digital sensor, which captures the image. The sensor converts the light into digital data, which is then processed by the camera's software to create a high-quality image with sharp details and vibrant colors.
Using a 300 dpi camera for image capture provides higher resolution and clarity, resulting in sharper and more detailed images. This is especially important for professional photography, printing, and digital media where image quality is crucial.
Traditional film cameras do not have a screen since the image is recorded onto celluloid and can only be viewed once it has been developed - this process is largely absent of electricity and is a blend of physics and chemistry, unlike modern digital cameras. Digital cameras store the image digitally and almost instantly, meaning you can view the image on the screen. The aspect ratio on digital cameras can vary, so technically the shape and size of the image can vary between 35mm fill cameras and digital. This is particularly noticable when using a lens taking from a 35mm camera and using it on a digital camera. Film cameras provide a far better quality of image that digital photography cannot (realistically) emulate. However, digital is preferred because the ease of producing large images is fast and requires little expereince - unlike film based photography.