0
If you painted your cement patio with a concrete paint but want to tile over it will the mortar stick to the oil-based paint?
I recommend consulting the flooring manufacturer, however, my experience suggests that the application you describe is an acceptable risk. Adhesion of floor tile to grout is more important than the grout's adhesion to the painted concrete substrate. Uniform stability is very important, and you have that with your painted concrete slab.
When I had my tile done, the company used a primer to rough up the smooth surface.
What else can I help you with?
What do they use to stick bricks together?
Mortar is used to stick bricks together. It can be either: * cement mortar: a mixture of water, sand and cement, or * lime mortar: a mixture of lime, sand and water.(This is not used often for modern construction because of its porosity) * clay mud mortar: a mixture of clay sand, water (only used in some adobe construction) Lime is sometimes added to cement mortar to improve workability, waterproof qualities, and reduce shrinkage. Straw is sometimes added to clay mortar to reduce shrinkage.
What are the uses of lime?
lime is used to mix with mortar cement and also to cover cadavers
Are poured or block basement walls easier to finish?
Masons tipsI have had better luck with the poured ones afetr the forms have been taken off. Making sure as the concrete is poured/pumped into the wasll to use a concrete vibrater to remove air which will result in hollow spots and cracking.You can finish the walls easily with Grout,cement,or a type of mortar that has less shrinkagee but this type hardens quickly, so have your mason ready with sponge floats /hand floats,Masons hammer,protective gear for eyes, hands,rubber boots, to prevent exsposure to the wet cement that will cause a chemical burn.
What is the difference between mortar and stucco?
Mortar is lime/sand or more recently cement/sand mixture used to 'glue' bricks and blocks together. Stucco is a decorative plaster applied to walls and ceilings to embellish the basic structure. Coving and ceiling roses are an example of ornate plasterwork. In a ddition to its use for bonding building bricks together mortar is used for surfaces to give a smooth finish, somewhat like plaster, this is called rendering in some locations. Stucco is similar in that it has aggregate added to give it a rough or textured finish.
The name of a hard surface of irregular stones and mortar?
Inca is the name of a hard surface of irregular stone and mortar. The Inca stone is usually used to make various artistic objects on a hard surface of irregular stones and mortar.
What are the differences between cement mortar and concrete?
Cement mortar is a mixture of cement, fine aggregate and water.Concrete is a mixture of cement, fine aggregate, coarse aggregate and water.Generally, concrete have higher strength than cement mortar.
How is concrete and mortar made?
Concrete :- a mix of cement, sand, water, and gravel. Mortar :- a mix of cement, sand, and water
How is mortar concrete made?
Concrete :- a mix of cement, sand, water, and gravel. Mortar :- a mix of cement, sand, and water
What is correlation between strength of mortar to strength of concrete?
mortar are mixing by sand & cement and concrete is mixing by cement, sand & stone
Beside cement what was the other solid in the ready mixed mortar?
Mortar has sand in it. Concrete has cement, sand and stone.
What is stronger concrete or Mortar?
Concrete is stronger than mortar.Because mortar is a mixture of cement, sand and water but concrete is a mixture of cement, sand, gravel and water. Thus concrete forms a stiff mix than mortar.Hence the concrete is more stronger than cement.
What is the difference between cement and mortar and concrete?
Cement paste is formed when cement is mixed with water. However, cement mortar is formed when cement is mixed with fine aggregate (sand) and water.The strength of cement mortar is more when compared to cement paste.Shrinkage will be less in cement mortar and high in cement paste.
What is the recommended mortar mix for concrete blocks?
The recommended mortar mix for concrete blocks is a 1:3 ratio of cement to sand.
What is the difference between concrete mortar and cement paste?
Cement paste is formed when cement is mixed with water. However, cement mortar is formed when cement is mixed with fine aggregate (sand) and water.The strength of cement mortar is more when compared to cement paste.Shrinkage will be less in cement mortar and high in cement paste.
Whst is the difference between masonry cement and common cement?
Cement is just the powder used to make mortar and concrete. Mortar has sand in it.
How many bag of cement for 1m2 of concrete blocks joint?
0.42cub.m (Cement sand mortar)
What are some products made from limestone?
cement concrete mortar bricks
