Yes, Acrylics will adhere to glass. If using the glass outside, be sure to varnish with a uvls varnish to prevent sun damage. I have used acrylic paints on many outdoor craft projects, some of which have been exposed to the weather for several years. None of them have dissolved or ran. Acrylic paints are composed of acrylic polymers and pigment suspended in water. As the water drys after application the polymers fuse together and form a strong permanent water resistant paint. In fact polymer craft paints were first used as high grade exterior water based house paints. Many of the better exterior water based house paints are still acrylic.
Personally, as a painter, I would suggest that you use glass paint on glass...not acrylic...just saying...
yes you can use acrylic paint to paint on glass. you should stick to more opaque colors because of its transparency. you want the colors to be seen but also see throught he glass as well. ,
No, it will not adhere to shiny surfaces like glass. As it fully cures it will flake off.
No. It comes right off of glass.
To paint glass lamps that have already been painted, you should first cover the light bulb socket and cord of the lamp with painters tape. You can then paint the glass lamp with Krylon Fusion paint. It is designed to adhere to glass and other slick hard to paint surfaces.
Here is a link for fabric paints-- Link#1 This link will give you the steps to Fabric Painting-- Link#2 To get best results, use a water based paint specifically designed to use on fabrics. Most hobby stores carry this kind of paint. **acrylic paint is the best (water based) and you can control the color and consistancy -
20 years ago I had used acrylic fabric paint over the floral pattern on a carved wood lamp stand.Yesterday I scraped it off with a knife.Gentle sandpapering removed the remaining stains on the flat surface.But the carving also has intricate veins and tiny cracks where the sandpaper cannot reach.That again needed to be carefully scraped out with the point of a small whittling knife.It is almost but not quite clean.I'll probably have to paint over it again.Water based acrylic can be cleaned out after a bit of soaking in detergent.
Most enamels will work just fine. (make sure the base has been sanded with fine sandpaper to give the surface some tooth for the paint to adhere to)
No, lead is only harmful if it exists in a form than can be introduced into the body. Lead glass or crystal is bound in the glass structure so as to render it inert.
To paint glass lamps that have already been painted, you should first cover the light bulb socket and cord of the lamp with painters tape. You can then paint the glass lamp with Krylon Fusion paint. It is designed to adhere to glass and other slick hard to paint surfaces.
"guessing cloth paint or craft paint the good stuff NOT WATERCOLOR!" It really depends on what kind of lamp shade you are talking about. Cloth paint will work for true cloth lamp shades. For vinyl and plastic, you need a craft paint for the type of surface you are painting (IE smooth or textured) For a glass they make paint specifically for work with glass that is designed to stick to slick surfaces. You can get both translucent (for staining glass) and opaque. Some of these may work on slick plastic. You should be able to go into any craft store and ask the clerk, most of them do all sorts of crafts as well and know what they are talking about. Be prepared to describe the material and texture of whatever you are painting, or bring the shade in with you for the best results.
A Tiffany lamp is a very expensive lamp. Tiffany is renowned for their glass and precious stones. A Tiffany lamp will have a lamp shade full of beautiful glass.
Here is a link for fabric paints-- Link#1 This link will give you the steps to Fabric Painting-- Link#2 To get best results, use a water based paint specifically designed to use on fabrics. Most hobby stores carry this kind of paint. **acrylic paint is the best (water based) and you can control the color and consistancy -
The digital answering machine was invented in 1991 Paste this link to find out more... http://inventors.about.com/od/astartinventions/a/Answering.htm
Sure!
To beat level 11 on Factory Balls 4, you will have to use this sequence: Yellow paint, lamp down, orange paint, lamp up, Lavender paint, aqua core with black belt, green paint, aqua core with black belt, lamp up, and finally lamp down.
Glass melts at between 900 degrees F and 1650 degrees F while the lamp operates at an estimated 100-130 degrees F, however, differential temperature changes, especially rapid changes in temperature may cause a glass surface to crack. The lamp is made of glass, and the bottom of the lamp usually has a felt pad, so there is no mechanical reason why the lamp may not be used on a glass surface except it may slip, and the manufacturer's instructions specifically state DO NOT operate the lamp on glass surfaces.
The glass of a kerosene lamp while glowing is hot. When water falls on it, there is a sudden change in temperature, which causes the glass to break.
The insulator of a lamp is the glass because it helps protect people from the heat.
The lamp under the glass slid of the microscope is called the "bulb" lol. just kidding. i have no idea.
It is an oil lamp with a glass chimney designed to protect the flame in high winds