no
METAL is a type of an elements eg. silver, copper
MOLTEN means soemthing has melted completely. eg. molten lava from a volcano.
lava/magma, molten metal,boiling water
It is widely scientifically believed that the inner core (deepest part of Earth) is made of solid iron. However the inner core is surrounded by an outer core of iron and nickel that is believed to be molten material.
"Font" is from the same root as "fountain" and in fact "font" is an archaic word for fountain.The origin of the usage in type comes from early printing presses that used metal type (set backward, and inked to create a right-reading printed image). An entire set of letters, upper- and lowercase, numerals, symbols, etc. was cast from the same vat--or "font"--of molten metal (lead).
Ceramic foam filter is the refractory ceramic material. It is used for filtration of molten metal,gas,water and so on.
A process in which molten metal is poured into a mold and allowed to harden.
The channel or spout through which molten metal runs into a mold in casting.
No, solid metal typically sinks in molten metal due to its higher density. When a solid metal is placed on top of molten metal, it will usually sink until it reaches a point where its density is equal to that of the molten metal around it.
of Melt, Melted; being in a state of fusion, esp. when the liquid state is produced by a high degree of heat; as, molten iron., Made by melting and casting the substance or metal of which the thing is formed; as, a molten image.
metal maybe iron or nickel or both
Molten ore refers to metal in a liquid state, typically resulting from heating raw ore material to high temperatures. This molten form allows for easier extraction and processing of the metal from the ore.
Their the same thing, only melted. The molten metal is hot, but the only things metal cannot carry is something at the temperature of lava or higher.
Ceramic is used in crucibles for molten metals because it can withstand high temperatures without deforming or reacting with the molten metal. Ceramic crucibles also have good thermal shock resistance, meaning they can be heated and cooled rapidly without cracking. Additionally, ceramic materials are chemically inert, ensuring they do not contaminate the molten metal during the melting process.
molten
The molds should be sand coated insides and a hole upside mold then introduce the molten metal.
Dross is a term used to describe impurities or scum that float on the surface of molten metal.
The blacksmith poured the molten metal into the mold to create a new sword.
Lava, or molten lava.