0
Besides sanding, grinding and scraping, you can remove Bondo from your clothes and other porous items with fingernail polish remover (acetone). Test the cloth in an inconspicuous spot before you try this because it will also dissolve some fabrics. You may need to let it soak for a while to soften it enough. Acetone evaporates very easily and is flammable so it would be best to do this outdoors. ZipStrip will also remove bondo but it is even more likely than acetone to destroy fabric...Test FIRST!
What else can I help you with?
What works the best to remove stains from clothes?
There is no single best way to remove all stains. The best way to remove a protein stain is with cold water and OxyClean. The best way to remove a dye stain is to use bleach if the fabric can handle it. Try looking up the best way to remove your specific stain.
Do you need your pollution pump?
No, the pollution pump was put on vehicles to satisfy the epa, they realy dont enhance engine performance in any way, the hoses get in the way, and so does the pump. some states reqire it if it came with the vehicle. One can remove this pump or just remove the belt that drives it without causing any problems with the engine.
2001 Chrysler Concorde how to take off intake?
Remove the air intake hose from the Concorde. Take off the throttle cables and any fuel lines or vacuum hoses in the way. remove the bolts for the intake, then lift it straight up to remove it.
How can you repair holes in metal?
thin material holes can be welded and ground flush, think material can be threaded and plugged. Bondo works, too.
How do you remove the starter from a 1998 Passport when the exhaust is in way?
You have to remove the cross over section of the exhaust
What is the best way to bondo your truck?
First grind off the excess parts then grind it then buff the appl the bondo
What are the best techniques for using wood filler bondo to repair damaged wood surfaces effectively?
To effectively repair damaged wood surfaces using wood filler Bondo, follow these techniques: Clean the damaged area thoroughly to remove any debris or dirt. Mix the Bondo according to the manufacturer's instructions. Apply the Bondo to the damaged area, using a putty knife to smooth it out. Allow the Bondo to dry completely before sanding it down to a smooth finish. Prime and paint or stain the repaired area to match the surrounding wood.
When was Bondo Shoshitaishvili born?
Bondo Shoshitaishvili was born in 1939.
Mix bondo with water?
Mixing bondo with water is not recommended, as bondo is meant to be mixed with a hardener to cure properly. Using water can compromise the strength and overall quality of the bondo. It is best to follow the manufacturer's instructions and mix bondo with the appropriate hardener for best results.
What is the distance between kisumu and bondo Kenya?
About 63km / 40 miles using Kisian - Bondo Road/Kisumu - Bondo Road/C27.
How can I effectively use wood bondo for repairing damaged wood surfaces?
To effectively use wood bondo for repairing damaged wood surfaces, follow these steps: Clean and prepare the damaged area by removing any loose or damaged wood. Mix the wood bondo according to the manufacturer's instructions. Apply the wood bondo to the damaged area, shaping and smoothing it as needed. Allow the bondo to dry completely before sanding and painting or staining as desired.
Who invented bondo?
I was told that my uncle, Robert Spink, did........ he was known as "Bondo Bob"!!
What is the capital of bondo county?
Bondo is not a county but a constituency that is located in the county of Siaya.
Pin holes in bondo?
the bondo was wiped to thick try laying a thinner layer
How do you get bondo smell out of car?
Let bondo air out, colder weather will make it take longer.
Who is the elected senator of bondo county?
Bondo is not a county but is a constituency that is represented by Gideon Ochanda Ogolla.
What is Roman Catholic Diocese of Bondo's population?
The population of Roman Catholic Diocese of Bondo is 418,000.
