The way to remove epoxy depends on where the epoxy is. If it is on the skin a person can use vinegar or acetone to remove the epoxy. If the epoxy is dried onto a surface a person can use paint thinner or adhesive remover to get rid of the epoxy.
You can remove epoxy from leather. Use a plastic knife to carefully scrape away as much as you can. After you have scraped away what you can, clean the rest with a cotton ball dipped into Acetone. Wipe away at the epoxy until it is gone.
Polished epoxy
Best to remove the epoxy first, otherwise you could experience some peeling issues. If you insist on not removing the epoxy, be sure to remove any grease or oil, clean and sand the surface flat so the floor paint has a solid surface to gain a tenacious bond.
I haven't seen a good epoxy that's thin enough for fine porcelain. I DO get good results from Elmer's China and Glass cement.
Yes! The muriatic acid will remove epoxy paint on a concrete floor. Usually the epoxy paint will bubble up and will require a flat-blade or wire brush to full remove and.... repeat as necessary. be sure to nuetralize the floor when finished with (1pound of baking soda to 5 gallons of water). I got this reference from http://foundationarmor.com and it worked!
To effectively remove epoxy from a glass table without causing damage, you can use a combination of heat and a scraping tool. Start by heating the epoxy with a hairdryer or heat gun to soften it, then gently scrape it off using a plastic scraper or putty knife. Be careful not to apply too much pressure to avoid scratching the glass surface.
One epoxy that is commonly used for bonding glass to glass is Loctite Glass Bond. It is designed specifically for glass-to-glass applications and provides a strong, clear bond.
An epoxy will bond glass to metal.
With epoxy.
Araldite will.
Epoxy is best for gluing glass to wood.
Glass Reinforced Epoxy
Epoxy or silicone.
an epoxy surfboard is when a surfboard is made out of epoxy resin this is more stronger and lighter than the normal fiber glass and they can have more stronger colours than fiber glass this can be done without the silk laminating process
The epoxy resin that is mixed with it.
epoxy is used in making gemstones to hold the rough to the dopstick and to remove it we use acetone. maybe this would work?
glass epoxy hylam aluminium