If you used the right paint, Bathroom paint, 2 top coats, over primmer,over greenboard
primmer, over greenboard or paperless drywall, then no.
For your painting project to see good results you should apply a coat of primer/sealer to the stained trim boards before applying the paint. Commonly used stains are oil base. Common paints are water base. The two do not work together. So seal the stain with a water base sealer and when it dries you can apply any kind of paint to it you desire.
I always wait 24 hours.
For a seamless finish, apply the stain before assembling the furniture.
The best way to stain bathroom floor cabinets is to first sand the wood. After that, apply the wood conditioner, then the stain and finally apply the finish.
No. The spar varnish acts as the sealer. Apply a thin coat and allow it to dry. Apply a second coat and allow it to dry. These two coats should have sealed the pores of the wood. Apply the third coat slightly thicker, so you get a nice even "wet look" to the wood.
Sealer means it will be the last step of the project. You apply acrylic sealer to salt dough after it has been painted.
Once it dries you usually paint it. If you mean after painting, you can use a sealer or clear varnish for some extra protection. It isn't necessary though.
When the VCT is old and worn. When there is possibility of staining. When there is high traffic. When you want the floor to really shine after applying floor finish over 2 coats of sealer.
First, make sure the car area to be painted is very clean and well sanded. Also, use a paint specific to cars and apply several thin coats. Apply a top coat/sealer to finish.
To dustproof concrete blockwork, you will need to apply a sealer. Polyurethane is a popular sealer for this purpose.
You will first have to remove the white paint. Use a paint thinner to help you get the paint off. Then you will want to use a light sandpaper and smooth the wood of the vanity. You can then apply the dark stain. The final touch is to apply a clear sealer and then lightly sand it.
For your painting project to see good results you should apply a coat of primer/sealer to the stained trim boards before applying the paint. Commonly used stains are oil base. Common paints are water base. The two do not work together. So seal the stain with a water base sealer and when it dries you can apply any kind of paint to it you desire.
If the sealer is properly applies according to some professionals, the sealer should last 10-15 years with light cleaning, not using harsh products to clean the floor. A person, most likely needs to apply a sealer once every 10 years.
There are many steps to complete before applying a driveway sealer. This process is not physically difficult, but it does involve a lot of time.
I always wait 24 hours.
You apply ceramic sealer, available at your tile store.
use 1/2 water and 1/2 bleach and apply for atleast 10 mins and use a nylon brush to remove . if that doesn't work try a product called mold blaster or something similar