If you are using your shed as something more than a place to put things out of the weather, and are looking for better aesthetics, then yes.
It is not necessary but I have found over the years if the inside stained or painted, it is a bit more durable.
You can stain balsa wood.
Wood stain is abosorbed into the wood, so the wood takes on the color of the stain. This is why the features of the wood are still visible, unlike with paint.
All of it. Otherwise the latex stain will seal the surface of the wood and the oil will not be able to penetrate into the wood. Sanding won't remove all of the residue. You'll want to use a paint stripper/stain remover too.
It could look blotchy depending on the type of wood and if it's a colored stain.
what is best stain to use on monkeypod for clear look show the true wood
You can stain balsa wood.
It will better to stain them to protect the wood patio chairs as opposed to painting them. I would also recommend covering them or putting them in a shed or garage if it gets cold in your area or you plan on not using them for a very long time.
Wood stain is abosorbed into the wood, so the wood takes on the color of the stain. This is why the features of the wood are still visible, unlike with paint.
It is generally recommended to stain the wood before assembly to ensure even coverage and to reach all surfaces easily.
For optimal results, it is recommended to apply 2-3 coats of stain on pine wood.
Wood stain is for sealing and emphasising the natural colour of wood
Yes, you can stain wood filler to match the surrounding wood by applying the same stain used on the wood and blending it in carefully.
The purpose of using pre-stain wood conditioner before applying stain to wood is to help the wood absorb the stain more evenly and prevent blotchiness or uneven coloration.
Wood stain should typically dry for at least 24 hours before applying polyurethane to ensure proper adhesion and a smooth finish.
For removing a stain from wood, start with a medium grit sandpaper like 80 or 100 to effectively remove the stain without damaging the wood. You can then progress to a finer grit sandpaper for a smoother finish.
Typically, one coat of pre-stain conditioner is sufficient before staining the wood.
Pressure treated wood should be allowed to dry for at least 6 months before staining to ensure proper adhesion and penetration of the stain.