Tighten in 3 stages:
1, 130 Nm
2, slacken off
3, 20 Nm+90 cape
The 2002 Cavalier 2.2 liter engine cylinder head bolt torque specification is 120 pounds. The cylinder head bolts should be torqued in 40 pound intervals.
Remove it from the car OR It can be flushed by a knowledgeable person with the correct equipment.
You get the manual for the engine that you are replacing the plugs in then you use your torque wrench and tighten to the specified torque. If you have an aluminum head, be super careful and be sure to use the correct torque spec.
Stage 1: 25nm Stage 2: 90° Stage 3: 90° Stage 4: 90° Stage 5: 45° Tightening sequence always goes in a spiral (10) (6) (2) (3) (7) (9) (5) (1) (4) (8)
Torque head to 50-55 ft/lbs
Hi need the torque setting for a Vauxhall zaferia 1.6 head
Chevrolet Cavalier there are more than 100 torque specifications for your 2003 Chevrolet Cavalier. You can get a complete list of torque specifications from most Chevrolet dealerships.
New bolts required,they are "use once"stretch bolt.Also,an angle gauge is required,or you can make one from card. Torque to 35Nm + 45 degrees + 15 degrees.
torque settings for a vauxhall 1.7 td clinder head
Which settings do u need
40 ft lbs of torque
what is the torque cylinder head bolts and the camshaft for KIA clarus 2.0 petrol DOHC 1998 model
you torque the bolts until they are good and tight
What are the torque settings for Nissan Patrol 4.2 petrol cylinder head and valve clearances?Read more: What_are_the_torque_settings_for_Nissan_Patrol_4.2_petrol_cylinder_head_and_valve_clearances
70 ft-lbbs
petrol/deisel 2.4 or 3.0??
Diesel engines have much more torque at low rpm.