0
What else can I help you with?
What is the torque specs for the lug nuts on a 2004 ford ranger 4 wheel drive?
95-105 Ft. lbs.
What are the wheel lug torque specs on a 2002 GM 1500?
Without looking at the specs, would guess up around 100 foot pounds.
What causes a stripped lug nut?
Not aligning the threads up correctly and forcing the lug nut onto the wheel stud will strip the lug nut.
What do you do if your lug wrench doesnt fit your lug nuts on your volks wagon?
Purchase a 4-way lug wrench from your local auto parts store.
What is the Lug pattern for 2005 Toyota Corolla?
What is the Lug pattern for 2005 Toyota corolla
Torque specs for lug nuts on 2004 vw passat?
120Nm.
What is the lug nut pattern on a 2004 Pontiac Sunfire?
should be 5x100
How to remove the spare tire on a 2003 Pontiac Montana?
The spare tire on a 2003 Pontiac Montana is under the vehicle behind the back bumper. It is lowered from the inside using the lug wrench on the tire iron.
2000 Pontiac Montana lug nut specs Can someone tell you the diameters and if anyother wheels fit on 2000 Montana other then factory alloys?
100 ft/lbs of torque 15" or larger diameter wheels 5 on 4.5" bolt circle Most other GM FWD only cars will fit
What is the torque specs for the lug nuts on a 2004 ford ranger 4 wheel drive?
95-105 Ft. lbs.
What are the lug nut torque specification for Pontiac Montana?
The lug nut torque specification for a Pontiac Montana typically ranges from 100 to 110 ft-lbs, depending on the model year and wheel type. It's always best to consult the owner's manual or a service manual specific to your vehicle for the most accurate information. Proper torque is crucial for wheel safety and performance, so make sure to use a torque wrench when tightening the lug nuts.
Lug nut torque for 2009 Pontiac vibe?
I have a 2007 vibe. I've only been able to find specs for vib 2003-05 at 76 ft-lbs.
What is the lug nut specs on 2005 Chevy Silverado?
140ft. LBs Factory specs.
What is a Mercedes c230 lug nut size?
what are specs for the 2003 C230 lug nut size
How To Change Brake Pads On A 2006 Pontiac Montana?
To change the brake pads on a 2006 Pontiac Montana, start by loosening the lug nuts and lifting the vehicle with a jack. Remove the wheel, then locate the brake caliper and unbolt it to access the brake pads. Slide out the old pads and replace them with new ones, ensuring they are properly seated. Reattach the caliper, replace the wheel, and lower the vehicle before tightening the lug nuts.
Lug specs 1989 iroc z?
100 lbs would be about right for 5 lug GM
What is the lug pattern on the 2004 Impala?
What is the lug pattern on the 2004 impala?
