New head bolts should come with specs, if not; refer to specifications section of service manual. You may be able to find one at a library or buy one from a parts store.
The 1990 Ford Festiva 1.3 liter engine cylinder head bolt torque specification is 125 pounds. The cylinder head bolts should be torqued in 25 pound intervals.
The 1996 Ford Escort 1.9 liter engine cylinder head bolt torque specification is 120 pounds. The head bolts should be torqued in 40 pound intervals.
No , the Ford 6.8 liter V10 gasoline engine has ( 2 timing CHAINS , 1 timing CHAIN to each cylinder head )
It depends on if it is a 4 cylinder or 6 cylinder. If you do the leg work to remove the head(s) and take them to an engine shop it should be no more than $250 per head. I just had my 4 cylinder done for $215. Expect to pay much more if you cannot remove and re-install the head yourself. $65+ an hour for a mechanic to remove and install the heads.
Need more background info. Cracked, or warped head. Gasket installed incorrectly.
NO
maruti 800 2002 tightening torques of cylinder head
Head nuts 18 ft-lb (25Nm), cylinder base nuts 25 ft-lb(34Nm)
stage1 70 nm stage 2 79 nm stage 3 90 degrees
Under the cylinder head. you have to take the head off to find it.
Where is the cylinder head temperature sensor on the 2003 ford explorer v8 engine
Bring it to your local garage
where is the cylinder temp sensor on a 2002 ford mustang six cylinder
aluminum
Ford CFord Cylinder Head Torque Specificationsylinder Head Torque Specifications
TUD5 engine head torques Stage 1. 40NM Stage 2. + 260 degrees Maximum head bolt length is 197mm.
torque settings for ford 5600 tractor head