# The part of the stapler that contains the staples and is depressed to make contact with the paper is called the magazine. # The magazine contains staples which are pushed to the front by the follow block. The follow rod is pulled forward by the follow spring. # Along with the magazine the outercase called the metal head comprise the upper assembly. # The lower assembly is often called the foot. # The foot contains the anvil which the upper assembly strikes. The anvil typically has two forms for the staples to take under pressure. # Most staplers contain two leaf springs. One in the base to secure the latch that allows for the release of the upper assemly, called the clearing spring, and one between the magazine and metal head that returns the upper assembly to its original position after use.
Books Ruler Pencil/Pen Stapler
* Shoes * Socks * Supplies * Stencil * Stapler * Sweater * Slippers * School books * School bus * Shirts * Shorts * Swim suit * snorkel * suntan lotion * stickers
parts of email window
If you need new parts, you will need to visit a motorcycle parts store near you. For used parts, inquire from a repair store.
dragith nurn mask parts that's what they are
Look here for a diagram of a stapler, perhaps you can use www.google.com to search for other stapler diagrams. http://www.emeraldinsight.com/fig/0330260409001.png
Staplers are made of plastic and steel. The important part of the stapler, which pushes a blade through the stick of staples, has to be made of steel, for strength.Various other parts can be made of plastic, depending on the quality of the stapler.
Turn off the stapler and lift the door cover. Push down on the blue or black plunger protruding from the stapler head. Load as you would a normal stapler.
The weight of a stapler can vary from a few ounces for a small stapler to 5 pounds or more for a electrically powered stapler.
The weight of a stapler can vary from a few ounces for a small stapler to 5 pounds or more for a electrically powered stapler.
The stapler snapped at the paper
Sometimes a staple can get jammed in the stapler. It also can get stuck while refilling the stapler.
because it staples with staples.
The main minerals used in making a stapler are steel and iron. Steel is commonly used for the staple wire and various components of the stapler, while iron is used in the casing and other structural parts. Other materials such as plastic may also be used in the construction of staplers.
the answer is a stapler a stapler has an acute angle
Samuel Slocum invented the stapler in 1841
the first stapler was made of metal