It means that the coilspring has snapped or broken so it is in more than one peice. It usually happens at the top or bottom where it is seated, a replacement will be needed.
I think it means that it comes with a new coil spring,new rubbers,new top bracket and anything else needed.
"Primavera' is Spanish, Italian or Portuguese for "spring".
A point where water issues from the ground, eg. a spring.
"Issues" refers to where a spring or stream issues from the ground
each electrode sticking up out of the top of the distributer cap that you attach the plug and coil wires to, is called a tower. So a distributer cap will have more than one tower. If it has a center one, that will be the coil wire tower, and the ones surrounding it in a circle will be the plug wire towers.
I'm not totally sure what your talking about, but I think you may mean the upper coil spring mount aka the coil bucket.
When the coil spring is completely compressed and the coils are touching
A incomplete metamorphosis means the some insects , includi
its incomplete
I think it means that it comes with a new coil spring,new rubbers,new top bracket and anything else needed.
If you mean inadequate, it can mean defective, imperfect, incompetent or incomplete.
It has incomplete octet (incomplete valence shell) after bond formation.
Water dripping on the front of a portable air conditioner could mean that the air filter needs to be changed. Your evaporator coil may also be dirty.
the frst one on the cfirst coil pack and then the closest one to the front of the engine an by front i mean where the crank shaft pully is
Not necessarily. It means that is the component being effected. It may mean the coil is bad. The coil should be tested.Not necessarily. It means that is the component being effected. It may mean the coil is bad. The coil should be tested.
If by incomplete you mean haploid, then yes.
The COIL HAS A POSITIVE AND A NEGATIVE TERMINAL. If you look at the top of the coil, it is generally marked + and - on the top.