All drawing is a form of projection in itself. If you mean how do you project orthographic shapes to trace then the best way would be to place a light 180 degrees behind the object you wanted to draw. This would cast a silhouette (which is essentially what an orthographic drawing is) that you can trace.
frontal profile horizontal
Orthographic Projection/Drawing is nothing but representing a 3-Dimensional Object into 2-Dimensional drawing. it is a form of parallel projection where all the projections are orthogonal to the projection plane resulting in every plane of the scene appearing in viewing plane so, Another name for Orthographic Drawing is "Multview Drawing"
the importance of Orthographic drawing is a basic understanding of presentation drawing, wherin 3 main views of an object are presented in correct dimension of the height, width and depth.
v Orthographic drawingØOrthographic drawings are orthographic projection drawings. These can be drawn at first angle projection and third angle projections.ØI am going to explain orthographic third angle projection drawing because I use them.ØIf I want to draw orthographic third angles projection drawing I have to follow some rules.ØThese rules are:ØThe view from the front is in the middle.ØThe view from the left is on the left.ØThe view from the right is on the right.ØThe view from the top is on the top.ØThe view from the bottom is on the bottom.ØThe view from the rear/back is on the far right.Example of orthographic third angle projection.Orthographic drawing advantageOrthographic drawing disadvantageEasy to recognized /read and understand by engineers.Hard to recognized by other people then engineers.Doesn't looks like at all to real design/picture.
hfgvgbvkn
You can find information on orthographic projection at the Wikipedia. Once on the website, type "Orthographic projection" into the search field at the top of the page and press enter to bring up the information.
these projections have dimensions
All drawing is a form of projection in itself. If you mean how do you project orthographic shapes to trace then the best way would be to place a light 180 degrees behind the object you wanted to draw. This would cast a silhouette (which is essentially what an orthographic drawing is) that you can trace.
frontal profile horizontal
orthographic projection
Orthographic Projection/Drawing is nothing but representing a 3-Dimensional Object into 2-Dimensional drawing. it is a form of parallel projection where all the projections are orthogonal to the projection plane resulting in every plane of the scene appearing in viewing plane so, Another name for Orthographic Drawing is "Multview Drawing"
An orthographic projection.
It makes the letter L
An orthographic projection.
Orthographic projection
No, a multiview projection is used for developing a multiview drawing. Multiview projections are orthographic projection where the object is behind the plane of projection, and is oriented such that only two of its dimensions are shown.