number of beats per minute stimulates respiratory rate
Your pulse rate is your heart rate.
In normal sinus rhythm the heart rate is below
it increases too because it has to pump more blood to the lungs for it to breathe
fetus is very small, the heart is very small so to pump enough oxygenated blood thru the developing fetus it must pump much faster than than an adult heart
You should walk around or stetch so that your heart rate slows down very gradually, as that is the best way for the heart to adjust back to its normal pump rate.
The relationship between stroke volume and pump rate?
In a hydraulic system, pump pressure and flow rate are directly related. As pump pressure increases, the flow rate also increases. This means that higher pump pressure results in a greater flow rate of hydraulic fluid through the system.
The relationship between pump power and flow rate in a fluid system is that as the flow rate increases, the pump power required to maintain that flow rate also increases. This is because the pump needs to work harder to move a larger volume of fluid through the system. Conversely, if the flow rate decreases, the pump power required will also decrease.
As stroke volume increases, pump rate decreases. This is an inverse relationship.
Simulate is a verb.
The efficiency of a NaK pump operating with a 3 in, 2 out flow rate is 66.67.
As much as the pump is rated for
The Rate Pump
If I hit you. It will simulate pain receptors in your body.
The mass flow rate of gasoline from a pump depends on the pump's flow rate and the density of gasoline. It is typically measured in kilograms per second or pounds per hour. The mass flow rate can be calculated by multiplying the volumetric flow rate (in liters per minute or gallons per hour) by the density of gasoline (in kg/L or lb/gal).
Simulate what a reader with sight problems might do.
The number of sprinklers that a 1 hp utility pump can run will depend on the flow rate and pressure requirements of each sprinkler. You would need to know the flow rate and pressure of the pump, as well as the flow rate and pressure required for each sprinkler, to determine how many sprinklers the pump can effectively run.