Want this question answered?
Clear poly-urethane, gloss, satin, or, matt.
Spray it with a clear gloss varnish.
You cannot. A glue stain, or any stain will show through clear varnish. It is always better to try and remove all stains or marks before varnishing. Almost every glue has a solvent that will remove it.
Yes, however, if it is an oil-based clear you'll see an amber color to the tint. Water-based clears tend to be crystal clear and do not affect the underlying color.
Yes, Minwax Poly S/G will work great on a headboard. Other options include spray lacquer, shellac or a spar varnish.
Woodstain is applied with a rag or brush and then varnished with clear varnish, or tinted varnish can be used, available in different timber colours.
1) varnish 2) use a wood stain
varnish it with clear nail varnish... normally works
First of all you will need clear nail varnish and white nail varnish . You apply the clear varnish first then wait for 3-4 minutes for it to dry then get the white nail varnish and apply it to the tip of the nail only . Wait for it to dry , this is very important as the nail varnish will smudge if you do not wait for it to dry. Then finally apply another coat of clear nail varnish for a glossy and smooth look . Hope this helped x
You can add a mohogany colored pigment to clear varnish. However, this is risky because if it is not done properly, or the pigment is not compatible with the varnish, it may not cover properly. There is also the possibility that it will peel off. The best policy is to purchase a varnish that is already mohogany colored from the manufacturer.
varnish
Dab with clear nail varnish/polish Put nail varnish around the hole and it shouldn't get bigger.
i dont no
Spray it with a clear gloss varnish.
Clear poly-urethane, gloss, satin, or, matt.
It gives a smooth, glossy effect
Clear felling