0
What else can I help you with?
I am trying to make a simple balloon detonator using an rf remote but the instruction states i need small gauge filament what is this?
A small gauge filament is a thin wire with a high melting point, just like the filament in light bulbs. That filament will heat up when electricity will pass through it. If you have enough battery power, I would suggest using a piece if pencil lead.
Why does a fused bulb does not light up?
A fused bulb does not light up asno current passes through its filament. by j.gayathri
A filament that makes up the body of most fungi and water molds?
A filament that makes up the body of most fungi and water molds is called hypha, the plural form being hyphae. They are embedded in the material where fungi and molds grow .
When electricity pass through the bulb what happens to the filament?
It gets heated up and glows spreading the light
What is the insulator in a light bulb?
Glass is the insulator in a light bulb. The base has a heavy piece of glass to separate the ring from the center, and there is a glass support inside the bulb to hold up the filament and separate the wires going to the filament.
What make up the flower's filament and anther?
filament
What does the anther and filament make up?
The anther and filament make up the stamen, which is the male reproductive structure of a flower. The anther is the part that produces and releases pollen, while the filament supports the anther.
What do the anther and filament make up?
The anther and filament make up the stamen of a flower. The anther is the part of the stamen that produces and releases pollen, while the filament is the thin, stalk-like structure that supports the anther.
What is The stalk inside the stamen?
The stalk part is called the filament.The filament hold the anther.These two parts make up the stamen.
What are the 3 parts that make up the stamen?
a stamen has 2 parts. the anther and the filament
What effect of current is utilised in bulb?
The effect of current utilised in a bulb is the conversion of electrical energy into light energy through the heating of the filament inside the bulb. This process is known as resistive heating, where the current passing through the filament encounters resistance, causing it to heat up and produce light.
What makes up the filament of light bulbs?
Filament of light bulbs are made up of Tungsten.
Why is a copper wire not used to make filaments of electric bulbs?
Because the filament is in effect a resistor. Copper is too good a conductor to provide resistance to the current, and would simply allow the current to complete the circuit. The light is generated by the filament glowing as it heats up in resistance to the current. Tungsten is a much better resistor.
What parts do you need to make a lightbub glow?
You need a filament, and then you run the electricity though it. The filament is made up of thin wire, but modern technology has given us the use of mercury or fluorescence in place of the filament (which would be an ionized gas).
Why is the filament inside an electric lamp made very fine?
The filament is fine so that its electrical resistance can be quite high. It is also long, for the same reason. Usually it is coiled up to fit the length in the lamp. The heating effect of electric current is proportional to the current squared, time the resistance (I*I*R). Most of the effect is due to the current. The current through the filament must be limited to stop it melting. Adding resistance will do that. Taking resistance away increases heating. So, a low energy lamp has a very thin filament and a high energy lamp will have a thicker filament.
What is bicycle lamp made of?
It's made of plastic then there's a filament inside to make it light up.
What is the part of a flower which holds up the anther?
Filament
