Later on, the topcoat will peel off in large chunks, showing the bare wood underneath.
Start with a primer, Perma Seal is great. then I would use oil based paint.
Yes, emulsion paint can be used as a primer, particularly on surfaces like drywall or previously painted walls. It helps to create a uniform base for topcoats, enhances paint adhesion, and can reduce the number of paint layers needed. However, for surfaces like bare wood or metal, it's better to use a dedicated primer for optimal results.
Primer, type depends on the type of wood.
You can always paint latex ( water based )over an oil based paint as the latex just dries on the surface. However don't paint an oil based over a latex paint. Oil based paints need to absorb into the wood or other surfaces or it will just dry and flake off. For more information on the differences and when or not to use a latex or oil paint please see the following article. . http://www.ehow.com/how_4713170_between-latex-oil-base-paint.html
I find your meaning a bit difficult to understand. -You don't paint and prime together. -The primer must be applied first and become totally dry before painting is carried out. If you're concerned about covering ability, use a good thick primer like Kilz. It will completely hide anything. If the masonite is pre-primed, then a paint and primer in one will work fine. If it is bare, then you need to treat it like wood and either give it two coats of the paint and primer in one, or better, give it a coat of primer, then paint.
you only use primer over bare wood or stains. If you have really tough stains you might need to use shellac based primer, otherwise any stain covering primer.
If you use a 100% acrylic primer on bare drywall, you should have no problem with top coating it with any sheen wall paint. Many flats are self priming on bare drywall though, so you may be able to save some money there. Just ask the paint store what the recommended primer is to determine what the most economical solution is. For exterior work, use a block fill primer for bare block, a hot stucco primer for new masonry less than a month old with a pH of 13 or less (check with a pH pencil) or a 100% acrylic exterior primer for any bare wood surface or bare masonry surface over 30 days old.
Aluminum wood primer was first developed in the 1960s as a paint primer specifically formulated for use on wood surfaces.
Start with a primer, Perma Seal is great. then I would use oil based paint.
It is generally not recommended to use metal primer on wood because metal primers are formulated to adhere and protect metal surfaces, which may not provide the best adhesion or protection for wood surfaces. It is better to use a primer specifically designed for wood to ensure proper adhesion and protection.
Yes, emulsion paint can be used as a primer, particularly on surfaces like drywall or previously painted walls. It helps to create a uniform base for topcoats, enhances paint adhesion, and can reduce the number of paint layers needed. However, for surfaces like bare wood or metal, it's better to use a dedicated primer for optimal results.
Primer, type depends on the type of wood.
Yes, you can.
It depends what kind of finish you will put on it, and whether it will be indoors our out: Indoors, latex paint: use latex wood primer Indoors, varnish: no primer required but can be stained, may need multiple coats Indoors, oil base: use an interior oil base primer Outdoors, latex paint: use an exterior latex wood primer Outdoors, varnish: no primer required but can be stained, use exterior varnish Outdoors, oil base: use an exterior oil base primer It depends what kind of finish you will put on it, and whether it will be indoors our out: Indoors, latex paint: use latex wood primer Indoors, varnish: no primer required but can be stained, may need multiple coats Indoors, oil base: use an interior oil base primer Outdoors, latex paint: use an exterior latex wood primer Outdoors, varnish: no primer required but can be stained, use exterior varnish Outdoors, oil base: use an exterior oil base primer
For wood surfaces, it is recommended to use a high-quality wood primer followed by a paint specifically designed for wood, such as acrylic or oil-based paint. These types of paint provide durability and protection for the wood surface.
You can always paint latex ( water based )over an oil based paint as the latex just dries on the surface. However don't paint an oil based over a latex paint. Oil based paints need to absorb into the wood or other surfaces or it will just dry and flake off. For more information on the differences and when or not to use a latex or oil paint please see the following article. . http://www.ehow.com/how_4713170_between-latex-oil-base-paint.html
It's recommended to bleach and power wash prior to painting the exterior of a home. A primer/sealer should be used on any bare wood or masonry and on any chalky surface however if the surface is clean and sound, a good quality paint should adhere without a problem.