rubbing alcohol has higher specific heat
Rubbing alcohol has no effect on water-based coatings, so you can not use it to tell if your coating is water or oil-based. Unlike denatured alcohol, which will melt latex paint and leave oil unaffected.
Latex (water based) paint will essentially dissolve in water; however a small amount of isopropyl (rubbing) alcohol will ensure removal, which you can then filter out.
Alcohol.
The reason a water pipe squeals is because of the water rubbing against the metal of the pipe.
NO! But, you can try using a pummis rock and shaving it down then putting athletes foot cream on it. Because of the tolnaftate that is in it it will kill the surface of the wart. The root of the wart should be burned by appling calus remover because it has 17% of a special acid. Ask your doctor about this acid they will tell you. Then whe you are at the root and applied the acid you will be good in a week. And when cleaning the wart use rubbing alcohol, soap and water, then rubbing alcohol again. It worked for me now j hope it works for you.
An object will float in water if its density is less than that of water. Rubbing alcohol has a lower density than water, so an object that sinks in rubbing alcohol likely has a higher density than the rubbing alcohol. This difference in density causes the object to sink in rubbing alcohol but float in water.
Yes, rubbing alcohol is a type of isopropyl alcohol. Isopropyl alcohol is a specific chemical compound, while rubbing alcohol is a general term for a solution containing isopropyl alcohol and water.
To make rubbing alcohol from isopropyl alcohol, you can mix it with water in a specific ratio. Typically, rubbing alcohol is made by combining 70 isopropyl alcohol with 30 water. This mixture creates a solution that is effective for disinfecting surfaces and skin.
No, rubbing alcohol is not a mineral. Rubbing alcohol is a liquid solution made up of isopropyl alcohol and water. Minerals are naturally occurring inorganic substances with a specific chemical composition and crystalline structure.
Rubbing alcohol is actually a mixture. To be specific it is a homogeneous mixture.
Water contains no alcohol or oils, as rubbing alcohol does.
Rubbing alcohol and isopropyl alcohol are both types of alcohol used for cleaning and disinfecting. Rubbing alcohol typically contains a mixture of ethanol and water, while isopropyl alcohol is a specific type of alcohol with a higher concentration of isopropanol. They can be used interchangeably in many applications such as cleaning wounds, sanitizing surfaces, and removing sticky residue. However, it is important to check the concentration and specific ingredients to ensure they are suitable for the intended use.
Rubbing alcohol contain water, methanol or isopropyl alcohol, a dye.
No, rubbing alcohol does not make water disappear when they mix. Instead, rubbing alcohol and water form a uniform solution where the molecules of both substances are evenly distributed throughout the mixture.
Objects will float better in rubbing alcohol than in water because rubbing alcohol has a lower density than water. This means that objects will displace less liquid in rubbing alcohol, making it easier for them to float.
Water. It has a higher density. The density of water is 1 g/cm3 and the density of rubbing alcohol is .786 g/cm3
Rubbing alcohol and isopropyl alcohol are both types of alcohol, but rubbing alcohol typically contains additives like water and denaturants, while isopropyl alcohol is pure alcohol. Isopropyl alcohol is more effective for disinfecting and cleaning because of its higher alcohol content, while rubbing alcohol is better for skin care due to its added ingredients.