0
ADSIEdit is a Microsoft Management Console (MMC) snap-in that acts as a low-level editor for Active Directory. It is a Graphical User Interface (GUI) tool. Network administrators can use it for common administrative tasks such as adding, deleting, and moving objects with a directory service. The attributes for each object can be edited or deleted by using this tool. ADSIEdit uses the ADSI application programming interfaces (APIs) to access Active Directory. The following are the required files for using this tool: · ADSIEDIT.DLL · ADSIEDIT.MSC Regarding system requirements, a connection to an Active Directory environment and Microsoft Management Console (MMC) is necessary
What else can I help you with?
Where can one find information on Adsiedit?
ADSI Edit is a computing function used in some Microsoft products. More information about it can be found on the Microsoft website or on tech support forums.
What is ldp what is replmon what is adsiedit what is netdom what?
The Lightweight Directory Access Protocol, or LDAP is an application protocol for querying and modifying directory services running over TCP/IP.[1] A directory is a set of objects with attributes organized in a logical and hierarchical manner. The most common example is the telephone directory, which consists of a series of names (either of persons or organizations) organized alphabetically, with each name having an address and phone number attached. An LDAP directory tree often reflects various political, geographic, and/or organizational boundaries, depending on the model chosen. LDAP deployments today tend to use Domain name system (DNS) names for structuring the topmost levels of the hierarchy. Deeper inside the directory might appear entries representing people, organizational units, printers, documents, groups of people or anything else that represents a given tree entry (or multiple entries). Its current version is LDAPv3, which is specified in a series of Internet Engineering Task Force (IETF) Standard Track Requests for comments (RFCs) as detailed in RFC 4510. LDAP means Light-Weight Directory Access Protocol. It determines how an object in an Active directory should be named. LDAP (Lightweight Directory Access Protocol) is a proposed open standard for accessing global or local directory services over a network and/or the Internet. A directory, in this sense, is very much like a phone book. LDAP can handle other information, but at present it is typically used to associate names with phone numbers and email addresses. LDAP directories are designed to support a high volume of queries, but the data stored in the directory does not change very often. It works on port no. 389. LDAP is sometimes known as X.500 Lite. X.500 is an international standard for directories and full-featured, but it is also complex, requiring a lot of computing resources and the full OSI stack. LDAP, in contrast, can run easily on a PC and over TCP/IP. LDAP can access X.500 directories but does not support every capability of X.500What is REPLMON?A: Replmon is the first tool you should use when troubleshooting Active Directory replication issues. As it is a graphical tool, replication issues are easy to see and somewhat easier to diagnose than using its command line counterparts. The purpose of this document is to guide you in how to use it, list some common replication errors and show some examples of when replication issues can stop other network installation actions. for more go to http://www.techtutorials.net/articles/replmon_howto_a.htmlWhat is ADSIEDIT?A: ADSIEdit is a Microsoft Management Console (MMC) snap-in that acts as a low-level editor for Active Directory. It is a Graphical User Interface (GUI) tool. Network administrators can use it for common administrative tasks such as adding, deleting, and moving objects with a directory service. The attributes for each object can be edited or deleted by using this tool. ADSIEdit uses the ADSI application programming interfaces (APIs) to access Active Directory. The following are the required files for using this tool:· ADSIEDIT.DLL ·ADSIEDIT.MSCRegarding system requirements, a connection to an Active Directory environment and Microsoft Management Console (MMC) is necessaryWhat is NETDOM?A: NETDOM is a command-line tool that allows management of Windows domains and trust relationships. It is used for batch management of trusts, joining computers to domains, verifying trusts, and secure channelsA: Enables administrators to manage Active Directory domains and trust relationships from the command prompt. Netdom is a command-line tool that is built into Windows Server 2008. It is available if you have the Active Directory Domain Services (AD DS) server role installed. To use netdom, you must run the netdom command from an elevated command prompt. To open an elevated command prompt, click Start, right-click Command Prompt, and then click Run as administrator. You can use netdom to: Join a computer that runs Windows XP Professional or Windows Vista to a Windows Server 2008 or Windows Server 2003 or Windows 2000 or Windows NT 4.0 domain. Provide an option to specify the organizational unit (OU) for the computer account. Generate a random computer password for an initial Join operation. Manage computer accounts for domain member workstations and member servers. Management operations include: Add, Remove, Query. An option to specify the OU for the computer account. An option to move an existing computer account for a member workstation from one domain to another while maintaining the security descriptor on the computer account. Establish one-way or two-way trust relationships between domains, including the following kinds of trust relationships: From a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain to a Windows NT 4.0 domain. From a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain to a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain in another enterprise. Between two Windows 2000 or Windows Server 2003 or Windows Server 2008 domains in an enterprise (a shortcut trust). The Windows Server 2008 or Windows Server 2003 or Windows 2000 Server half of an interoperable Kerberos protocol realm. Verify or reset the secure channel for the following configurations: Member workstations and servers. Backup domain controllers (BDCs) in a Windows NT 4.0 domain. Specific Windows Server 2008 or Windows Server 2003 or Windows 2000 replicas. Manage trust relationships between domains, including the following operations: Enumerate trust relationships (direct and indirect). View and change some attributes on a trust.SyntaxNetdom uses the following generalsyntaxes: NetDom [] [{/d: | /domain:} ] []NetDom help
What is ldp replmon?
What is LDP?A: The Lightweight Directory Access Protocol, or LDAP is an application protocol for querying and modifying directory services running over TCP/IP.[1]A directory is a set of objects with attributes organized in a logical and hierarchical manner. The most common example is the telephone directory, which consists of a series of names (either of persons or organizations) organized alphabetically, with each name having an address and phone number attached.An LDAP directory tree often reflects various political, geographic, and/or organizational boundaries, depending on the model chosen. LDAP deployments today tend to use Domain name system (DNS) names for structuring the topmost levels of the hierarchy. Deeper inside the directory might appear entries representing people, organizational units, printers, documents, groups of people or anything else that represents a given tree entry (or multiple entries).Its current version is LDAPv3, which is specified in a series of Internet Engineering Task Force (IETF) Standard Track Requests for comments (RFCs) as detailed in RFC 4510.LDAP means Light-Weight Directory Access Protocol. It determines how an object in an Active directory should be named. LDAP (Lightweight Directory Access Protocol) is a proposed open standard for accessing global or local directory services over a network and/or the Internet. A directory, in this sense, is very much like a phone book. LDAP can handle other information, but at present it is typically used to associate names with phone numbers and email addresses. LDAP directories are designed to support a high volume of queries, but the data stored in the directory does not change very often. It works on port no. 389. LDAP is sometimes known as X.500 Lite. X.500 is an international standard for directories and full-featured, but it is also complex, requiring a lot of computing resources and the full OSI stack. LDAP, in contrast, can run easily on a PC and over TCP/IP. LDAP can access X.500 directories but does not support every capability of X.500What is REPLMON?A: Replmon is the first tool you should use when troubleshooting Active Directory replication issues. As it is a graphical tool, replication issues are easy to see and somewhat easier to diagnose than using its command line counterparts. The purpose of this document is to guide you in how to use it, list some common replication errors and show some examples of when replication issues can stop other network installation actions. for more go to http://www.techtutorials.net/articles/replmon_howto_a.htmlWhat is ADSIEDIT?A: ADSIEdit is a Microsoft Management Console (MMC) snap-in that acts as a low-level editor for Active Directory. It is a Graphical User Interface (GUI) tool. Network administrators can use it for common administrative tasks such as adding, deleting, and moving objects with a directory service. The attributes for each object can be edited or deleted by using this tool. ADSIEdit uses the ADSI application programming interfaces (APIs) to access Active Directory. The following are the required files for using this tool:· ADSIEDIT.DLL· ADSIEDIT.MSCRegarding system requirements, a connection to an Active Directory environment and Microsoft Management Console (MMC) is necessaryWhat is NETDOM?A: NETDOM is a command-line tool that allows management of Windows domains and trust relationships. It is used for batch management of trusts, joining computers to domains, verifying trusts, and secure channels A:Enables administrators to manage Active Directory domains and trust relationships from the command prompt.Netdom is a command-line tool that is built into Windows Server 2008. It is available if you have the Active Directory Domain Services (AD DS) server role installed. To use netdom, you must run the netdom command from an elevated command prompt. To open an elevated command prompt, click Start, right-click Command Prompt, and then click Run as administrator.You can use netdom to:Join a computer that runs Windows XP Professional or Windows Vista to a Windows Server 2008 or Windows Server 2003 or Windows 2000 or Windows NT 4.0 domain.Provide an option to specify the organizational unit (OU) for the computer account.Generate a random computer password for an initial Join operation.Manage computer accounts for domain member workstations and member servers. Management operations include:Add, Remove, Query.An option to specify the OU for the computer account.An option to move an existing computer account for a member workstation from one domain to another while maintaining the security descriptor on the computer account.Establish one-way or two-way trust relationships between domains, including the following kinds of trust relationships:From a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain to a Windows NT 4.0 domain.From a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain to a Windows 2000 or Windows Server 2003 or Windows Server 2008 domain in another enterprise.Between two Windows 2000 or Windows Server 2003 or Windows Server 2008 domains in an enterprise (a shortcut trust).The Windows Server 2008 or Windows Server 2003 or Windows 2000 Server half of an interoperable Kerberos protocol realm.Verify or reset the secure channel for the following configurations:Member workstations and servers.Backup domain controllers (BDCs) in a Windows NT 4.0 domain.Specific Windows Server 2008 or Windows Server 2003 or Windows 2000 replicas.Manage trust relationships between domains, including the following operations:Enumerate trust relationships (direct and indirect).View and change some attributes on a trust.SyntaxNetdom uses the following general syntaxes:NetDom [] [{/d: | /domain:} ] []NetDom help
The number of days before a deleted object is removed from the directory services This assists in removing objects from replicated servers and preventing restores from reintroducing a deleted object?
The tombstone lifetime in an Active Directory forest determines how long a deleted object - aka a 'tombstone' - is retained in Active Directory. The tombstone lifetime is determined by the value of the tombstoneLifetime attribute on the Directory Service object in the configuration directory partition.Tombstone Lifetime assists in removing objects from replicated servers and preventing restores from reintroducing a deleted object. Actually when an object is deleted from Active Directory, it is not physically removed from the Active Directory for some days. Instead, the Active Directory sets the 'isDeleted' attribute of the deleted object to TRUE and move it to a special container called 'Tombstone'. The default Tombstone Life time period is 60 days in Windows Server 2003 But the default Tombstone Lifetime period has been changed in Windows Server 2003 SP1 and later to 180 days. The tombstone lifetime attribute remains same on all the domain controllers and it is deleted from all the servers at the same time. This is because the expiration of a tombstone lifetime is based on the time when an object was deleted logically from the Active Directory, rather than the time when it is received as a tombstone on a server through replication.Reconfiguring Tombstone Lifetime: Default period of Tombstone Life time is 180 days in Windows Server 2003 SP2 or later. This is because the value of tombstoneLiftetime object is The default Tombstone Lifetime can be modified through ADSIEDIT console, if necessary. the longer tombstone lifetime decreases the chance that a deleted object remains in the local directory of a disconnected DC beyond the time when the object is permanently deleted from online DCs. This attribute is located in the below path: cn=Directory Service,cn=Windows NT,cn=Services,cn=Configuration,dc=To Change the Value, go to:Run > ADSIEDIT.mscExpand: Configuration > CN= Configuration > CN=Services > CN=Windows NT > and right click on CN= Directory ServiceYou will get an attribute window, Drill down to tombstoneLiftime, and double click it. You will get a field to type down the value, type the value you intended and click OK.
Which commands can be used to configure active directory permissions from the command line?
The following command-line tools can be used to manage Active Directory CSVDE Import and export Active Directory data using comma-separated format. Dsadd Add users, groups, computers, contacts, and organizational units to Active Directory. Dsmod Modify an existing object of a specific type in the directory. The types of objects that can be modified are: users, groups, computers, servers, contacts, and organizational units. Dsrm Remove objects of the specified type from Active Directory. Dsmove Rename an object without moving it in the directory tree, or move an object from its current location in the directory to a new location within a single domain controller. (For cross-domain moves, use the Movetree command-line tool.) Dsquery Query and find a list of objects in the directory using specified search criteria. Use in a generic mode to query for any type of object or in a specialized mode to query for for selected object types. The specific types of objects that can be queried through this command are: computers, contacts, subnets, groups, organizational units, sites, servers and users. Dsget Display selected attributes of specific object types in Active Directory. Attributes of the following object types can be viewed: computers, contacts, subnets, groups, organizational units, servers, sites, and users. LDIFDE Ceate, modify, and delete directory objects. This tool can also be used to extend the schema, export Active Directory user and group information to other applications or services, and populate Active Directory with data from other directory services. Ntdsutil General purpose Active Directory management tool. Use Ntdsutil to perform database maintenance of Active Directory, to manage single master operations, and remove metadata left behind by domain controllers that were removed from the network without being properly uninstalled.
