answersLogoWhite

0

Painting isn't going to cover them, it is just going to give them color. You need to mud and sand them smooth, then prime before you paint.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How can I properly install drywall around a door frame?

To properly install drywall around a door frame, first measure and cut the drywall to fit around the frame. Secure the drywall to the studs using drywall screws. Use joint compound and tape to cover the seams and corners. Sand the joints smooth and apply a primer before painting.


How can I effectively hang drywall on a ceiling?

To effectively hang drywall on a ceiling, start by measuring and cutting the drywall to fit the space. Use a drywall lift to hold the drywall in place while you screw it into the ceiling joists. Make sure to stagger the seams and use drywall tape and joint compound to cover the seams and create a smooth finish. Sand the joints and apply a primer before painting the drywall.


How can I properly install an access cover for drywall?

To properly install an access cover for drywall, follow these steps: Measure and mark the location for the access cover on the drywall. Cut out the marked area using a drywall saw or utility knife. Attach the access cover frame to the opening using screws or adhesive. Place the cover over the frame and secure it in place. Finish by painting or decorating the cover to match the surrounding drywall.


How can filling large gaps in drywall be effectively accomplished?

Filling large gaps in drywall can be effectively accomplished by using joint compound and drywall tape to cover the gap, then sanding and painting the area for a smooth finish.


What are the best installation techniques for a drywall cover panel?

The best installation techniques for a drywall cover panel include measuring and cutting the panel to fit, securing it with screws or nails, taping and mudding the seams, and finishing with sanding and painting for a smooth surface.


How can I effectively cover holes in drywall?

To effectively cover holes in drywall, you can use a patching compound or a drywall repair kit. First, clean the area around the hole and apply the compound or patch according to the instructions. Smooth it out and let it dry completely before sanding and painting over it to match the rest of the wall.


What is the best way to repair a large hole in drywall?

To repair a large hole in drywall, you can use a drywall patch kit or cut out a new piece of drywall to fit the hole. Secure the patch in place with drywall screws, cover the seams with joint compound, and sand it smooth before painting to match the surrounding wall.


How can I achieve a professional finish when applying tape and texture to drywall?

To achieve a professional finish when applying tape and texture to drywall, follow these steps: Prepare the drywall surface by sanding and cleaning it thoroughly. Apply joint compound to cover seams and tape them with drywall tape. Smooth out the joints with a taping knife and let it dry completely. Apply a thin layer of joint compound over the taped seams to blend them in. Use a texture roller or brush to create the desired texture on the drywall. Allow the texture to dry completely before painting or finishing as desired.


How do you properly hang drywall on walls to ensure a secure and professional installation?

To properly hang drywall on walls, start by measuring and cutting the drywall to fit the space. Then, attach the drywall to the studs using drywall screws or nails. Make sure to stagger the seams and use joint compound and tape to cover the seams. Sand the joints smooth and finish with primer and paint for a professional installation.


How can you fill a hole where breaker was?

To fill a hole where a breaker was located, you can use a piece of drywall or a drywall patch kit to cover the hole. Secure the drywall in place with drywall screws, then finish the patch by applying joint compound, sanding it smooth, and painting to match the wall. Alternatively, you can use a filler specifically designed for patching holes in walls for a quicker fix.


How can I effectively cover a hole in drywall?

To effectively cover a hole in drywall, you can follow these steps: Clean the area around the hole and remove any loose debris. Cut a piece of drywall slightly larger than the hole. Place the drywall patch over the hole and secure it with drywall screws. Apply joint compound over the patch and smooth it out with a putty knife. Allow the compound to dry, then sand it down and apply additional coats as needed. Finish by painting over the repaired area to match the surrounding wall.


What is surface taping?

Surface taping is a technique used in construction and drywall installation to cover joints and seams between different materials or panels. It involves applying tape to the joints before adding joint compound to create a smooth surface. Surface taping helps create a seamless finish and strengthen the joints.