they figure a man can hang about 6-8 sheets 4x8 an hour - when you figure in cutting round outlets - windows ect. drywallers don't make alot of money say -8.00 to 15.00 an hour ....... drywall is usually charged by the square foot --- at .60-1.25 a foot including finishing ...... .15 to .40 just for hanging ...... question is why are you onlly hanging 4x8 sheets -- you should be hanging 4x8, 4x10, 4x12, 4x14, 4x16 whatever it takes to make as least amount of joints possible- that's how you save money !
It depends (obviously). For example, I had an average size bedroom done, and they put dry wall on top of dry wall. The cost was $300 for labor. Not sure if that was a good or bad price.
$40 per board (including materials) in my area: North Carolina
They Can't Hang Me was created in 1955.
For all eternity, as neither of them wanted to hang up first. "No, you hang up! xx" "No Clive, you hang up, tehe!" etc etc
There are many ways one can hang a ceramic mask. One can hang a ceramic mask using popular products such as the popular Command brand hooks and strips.
The Louvre
Drywall labour costs depend largely on where you do them. Labour costs across north America differ locally.
Replace the drywall with tile backer.
$40 per board (including materials) in my area: North Carolina
You can use drywall nails or drywall screws. I prefer the screws.
drywall can actually be saturated at least twice without harm or loss of strength. it is a common pratice to wet drywall to hang a radius wall. When the drywall dries it accually becomes harder. If the paper peals off of the drywall it needs to be replaced, otherwise it can be patched.
No, this unit may only be hung on a wood stud, concrete, or cinder block.
when you hang drywall, you have to tape off the seams with paper tape and "mud", then "float" the mud smooth. the drywall float is a flat metal tool on a handle that you drag across the mud to smooth it out, like when you smooth out the icing on a cake
To have this done by skilled labor, it will cost around 1600 dollars for this amount of square feet. If you hang it yourself, it will cost around 900 dollars.
The easiest way is to have a partner and two drywall horses. Pin the sheet to the ceiling with your heads and nail the perimeter and best result is to have a follow up guy to screw it off as you and your partner hang.
I have seen a crew do it in one day for $700 here in CT. (and they were working with fire code sheet rock). This was strictly to hang it, taping was not included.
12.00 labor a sheet
Average is around $350. If you are looking for a stripped lower receiver, the price should hang around $100.