The best paint stain blocker often depends on the specific stains you're dealing with, but products like Zinsser BIN and KILZ Premium are highly recommended. Zinsser BIN is a shellac-based primer that effectively blocks tough stains, including water and smoke damage, while KILZ Premium offers excellent adhesion and mildew resistance for a wide range of surfaces. Both options provide a solid base for paint and help ensure a smooth, clean finish. Always choose a product suited to your specific needs for the best results.
If you paint over the "weathered" paint, it will chip and cause the stain to come off. Also, the stain needs a clean sanded surface in order for the wood to absorb it. Otherwise, there is no reason to use stain.
Painting a thatched roof can be challenging. It is best to use a stain as it will sink into the thatch material. After you have applied 2-3 coats of stain, you will want to use a sealer to protect it from the elements.
Yes, in fact it is even more important to mix stain, than paint as the pigment tends to settle out easier with stain.
Yes, UV paint can stain clothes, especially if it's not cleaned off quickly. The pigments in the paint can adhere to fabric fibers, making it difficult to remove. It's best to handle UV paint with caution and protect your clothing, as stains may not come out completely even with washing.
If the paint dries it will, but if it is NOT dry you can remove it with hot water
Walls are walls, wherever they are. - This problem depends on what the stain is and you haven't said. Possibly easiest to simply repaint the wall - first with a 'stain blocker' such as Zinnser Bull's Eye or Kilz Stain Blocker Primer. -These products work well and ANY paint can be applied over them. -(if the wall is papered, then you should remove paper first.)
If the stain is dry and the ceiling, if papered, is still sound, then try using a "stain-blocker" paint. Most paint manufacturers produce such paints.* Do not use a water-based paint, such as emulsion or acrylic, because the stain, even though dry, will still bleed through.It is important to remember that two coats may be necessary: the first painted across the stain in one direction and, after that has dried, another coat painted at right angles across the first coat.Do not use any finishing coat until all traces of the stain have been "blotted out" by the stain-blocker. Allow to dry thoroughly and then finish off with one or two coats of ceiling paint i.e. emulsion or acrylic. * Dulux and International Paints(usual disclaimers apply!) are effective.
What is the best DHT blocker
Paint stays on the surface and stain soaks into the the surface.
Yes, you can use stain in a paint sprayer for your project.
If you paint over the "weathered" paint, it will chip and cause the stain to come off. Also, the stain needs a clean sanded surface in order for the wood to absorb it. Otherwise, there is no reason to use stain.
To paint over stain effectively, start by cleaning and sanding the stained surface. Apply a primer specifically designed for covering stains, then paint with a high-quality paint. Make sure to allow proper drying time between coats for best results.
Painting a thatched roof can be challenging. It is best to use a stain as it will sink into the thatch material. After you have applied 2-3 coats of stain, you will want to use a sealer to protect it from the elements.
Yes, in fact it is even more important to mix stain, than paint as the pigment tends to settle out easier with stain.
You will need to paint the stain with a pickling gel. It is very rough, but it will get the stain off.
Lacquer paint (works best if you sand it first with a fine-grain sandpaper).
Use tide stain remover, if that doesn't work, well sorry!